TM2500 Aero I&C Controls Engineer at Prismecs LLC

• As a TM2500 I&C Controls Engineer at Prismecs, you will play a crucial role in the day-to-day operation of plant facilities and equipment.
• The I&C Controls Engineer is responsible for ensuring the control, electrical and instrumentation requirement of equipment inside the power plant to meet statutory requirements and function properly.
• Will carry out with performance, commissioning and execution for the string test, test bench preparation and test bench disassembly, functional test, loop check,  test execution, trouble shooting and prompt non-conformity resolution maintaining connection with other technicians and software calibration.
• The I&C Controls Engineer will report with the Plant Manager or the Team leader in charge.

Responsibilities

• Performing diverse technical tasks onsite and possessing extensive expertise in turbine control systems, including Woodward Micronet, Micronet +, Atlas, Mark V, Mark VI, Mark VIe, Mark VIeS, and Bently Nevada 3500. Proficient in configuring HMI using Wonderware, Cimplicity, and iFix.
• Ensure compliance with health, safety, and environment regulations in the power generation plant industry.
• Collaborate with HSE and adhere to directives and guidelines.
• Execute preventive and corrective works and maintenance in facilities and equipment according to OEM manuals, best industry practices, and guidance from the Plant Manager.
• Maintain high personal standards, reporting and repairing sub-standard performance and equipment installations.
• Update the maintenance history of plant facilities and equipment in logbooks, reports, and digital files.
• Ensure all projects meet technical requirements from a control, electrical, and instrumentation perspective.
• Report on project engineering technical scope performance against OEM standards.
• Identify engineering deliverables and assist in O&M based on the agreed scope.
• Provide control, electrical, and instrumentation engineering support to the Plant Manager for contractual availability and power output.
• Review and approve 3rd party control and instrumentation engineering content.
• Ensure agreement with Plant Manager on any engineering scope changes.
• Coordinate with the Plant Manager for maintenance activities, approvals, and interventions to minimize impact on plant availability.
• Mentor, coach, and provide training to operations personnel.
• Address emergencies resulting from equipment failures promptly.
• Propose lists of essential parts, consumables, tools, and materials.
• Collaborate with Plant Manager for inventory audits and material availability.
• Participate in Root Cause Analysis (RCA) and provide relevant information.
• Operate SCADA, Protection, and Control Systems during the control room shift.
• Execute preventive routine inspections and ensure accurate daily reporting.
• Support other activities assigned by the Shift Supervisor.
• Contribute to team efforts and support other plant areas to achieve operational goals.
• Work in a multicultural and multidisciplinary environment with minimal supervision.

Required Skills 

Field Service Engineers with knowledge of:

• Gas Turbines
• Generators
• Electric Motors & Pumps
• Instruments
• Servomechanisms
• Actuators
• Fire-Fighting systems
• Machinery knowledge

Qualifications

• Honors degree or higher in Control, Electrical, and Instrumentation Engineering.
• Proficient in English, Spanish or French (reading, writing, and speaking)
• Minimum of 5 years' experience in design, commissioning, qualification, and technical support.
• Experience with Woodward Micronet, Micronet +, Atlas, Mark V, Mark VI, Mark VIe, Mark VIeS, and Bently Nevada 3500. Proficient in configuring HMI using Wonderware, Cimplicity, and iFix.
• Knowledgeable with ABB, ComAp, DEIF controls.
• Experience with Power System modeling packages (SKM, ETAP, EazyPower, CYME).
• Familiarity with engineering standards (CSA, NEC, NESC, IEEE, ANSI).
• 3 years of work experience in power generation plants (TM2500 or LM6000 or PGT25).
• Proficiency in Microsoft Windows and Microsoft Office.
• Industrial communication, protection systems, predictive, proactive maintenance practices, and CMMS system knowledge.
• Basic knowledge of HSE, ISO 9001, ISO 14000, and OHSAS 18001.