Fresh Jobs at SPIE Oil & Gas Services

• The Senior Support Engineer is the OEM Certified Expert on Data Network Infrastructure DW/JV. With wealth of cognate on the job experience on the equipment operations, maintenance and management.

EXPERT:

• Data, TOIP, Copper & Fiber Cabling, IPTV
• Video Conference, Wi-Fi, Switches, Routers, AP's.

OPERATIONS :

• Follow up the immediate resolution of critical and challenging system faults  
• Liaise with OEM for issues bordering on level 3 support on the equipment or network
• Ensure compliance to COMPANY’S HSE practices..
• Carry out analysis of routine maintenance report with the aim of proactively implementing any recommended corrective action
• Implementation of major equipment relocation, equipment installation, network reengineering, reconfiguration and commissioning.
• Training and mentoring of the support engineers and technicians within the team
• Supervision of the team maintaining homogeneous equipment within the Data equipment and network
• Resolution of level 2 and above faults on Data/structure equipment and network within the SLA
• Preparation and implementation of routine or preventive maintenance
• Updating of network as-built and site engineering documents
• Provide periodic statistics on system performance.
• Mentoring of Support engineers and Technicians within his team
• Installation, configuration and maintenance of Untrust (Internet) systems  including Firewalls.
• Installation, configuration and maintenance of data support infrastructure for Industrial networks (including DCS/ICSS/PI systems) in conjunction to FO/Instrument team. Resolution of all incidents related to data support infrastructure for Industrial networks.
• Decommissioning of Data, TOIP and VC equipment at all locations
• Installation, configuration & maintenance of Wi-Fi APs & devices (regardless of OEM) like Ucopia & Cisco WLAN controllers)
• Installation, configuration and maintenance of TOIP Voice Gateways and Gatekeepers (regardless of OEM).
• Installation, configuration and maintenance of Message display/CBIS/DMIS systems.
• Installation, configuration & maintenance of data multiplexers, data monitoring and management tools (regardless of OEM) like packet shapers, Netflow (Solar winds), Cisco Prime, Cisco TACACS/ACS/ISE etc.
• Installation, configuration and maintenance of all Data Infrastructure devices(regardless of OEM), TOIP,CUCM, Cisco IP phones, Analog phones, Modems, IPTV devices, IP CCTV devices, VC devices etc.
• Resolution of all incidents related to TOIP devices (regardless of OEM) including CUCM, Voice Gateway routers, Analog VGs, Cisco IP phones,
• Routine and Preventive Maintenance of Video Conference (VC) Infrastructure; Daily & Weekly testing and Availability reporting on VC devices
• Routine and Preventive Maintenance of TOIP Infrastructure; Daily & Weekly testing and Availability reporting on TOIP device

Profile

As a Senior Support Engineer the holder of this post must have the following qualifications:

• Engineering Degree
• Ability to work independently while maintaining good relations with colleagues 

Languages:

• English mandatory

go to method of application »

OPERATIONS:

• Understanding and implementing designs from technical drawings
• Interacting with contractors and customers using verbal and written communication
• Making presentations to clients and coworkers
• Attending company meetings
• Creating product documentation and records
• Preparing cost estimates for customers and other employees
• Inspecting electrical components during and after the product installation

Profile

• Proven expertise as an electrical and instrumentation/telecom engineer
• Hands-on experience using design, calculation, drafting and modelling software
• Deep knowledge of electrical and instrumentation construction and installation processes and work package development
• Understanding of electrical engineering codes and safety standards
• Problem-solving abilities
• Attention to detail
• Strong organizational and communication skills
• A degree in Electrical Engineering; MSc is a plus

go to method of application »

MISSIONS:

QHSE:

• Ensures HSE policy fulfillment during his activities.
• Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules
• Is responsible to ensures compliance with HSE Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude
• Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity
  Contributes to achieve and improve HSE targets
• Performs the updating of technical documentation.
• Gives his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions.

Main Activities: 

• Monitor equipment conditions using all indications available in the control room, on site, and portable test equipment.
• Diagnose equipment problems, report abnormal conditions to day-shift crew, and prepare detailed work requests for plant defects.
• Manage intervention and prepare the technical reports related to the field.
• Take charge of the systems/equipment under his/her responsibility in case of breakdown until correct operation status.
• Performs troubleshooting and problem solving on the high voltage equipment when the need arises.
• Performs high voltage switching & isolations when the need arises.
• Leads the night shift team and provides adequate handover and information to day shift team leadership.
• Ensures continuous and safe running of equipment and turbines.
• Read, interpret, and implement technical information found in manufacturer's and OEM technical manuals, electrical and mechanical P & IDs, and operating and maintenance procedures

Profile

• Strong safety culture
• Strong work ethic
• Solid experience in high voltage switching, distribution and generation.
• Good leadership qualities
• Must be autonomous and able to work un-supervised.
• Shows initiative, able to take charge and must be decisive.
• Ability to work night shift

go to method of application »

SPIE Services Nigeria Limited is looking to hire a PVV Senior Engineer to join her team of work force in Nigeria.

OPERATION:

His task/responsibilities shall include:

• Ensures that the PVV design and related PVV Engineering Deliverables are compliant with TOTAL E&P General Specifications, applicable platforms/project specifications, applicable international/local Codes & Standards and applicable local regulations.
• Ensures HSEQ compliance by design.
• Ensures that the PVV Engineering Package is fully in accordance with the Scope of Work, free of clashes, consistent and compliant with the quality requirements.
• Ensures that the designed PVV modification involves no HSE risk during site execution, minimum offshore site works and minimum production loss.
• Ensures that design done by VENDOR is in accordance with Technical Requisition.
• Ensures that work is delivered in time in accordance with the planning.
• Ensures that the PVV Design Appraisal Dossier (DAD) is compliant with PED requirements, complete and approved by NoBo for hand over to Construction team.
• Ensures Constructability, Operability and Maintainability of designed PVV modifications
• Contributes to achieve clients and Department HSE objectives. Report anomalies and any HSE events.
• Contributes to the implementation of corrective actions when required/requested.

Specialty Either: PIPING or Vessel & Exchanger or Valves

Profile

He shall possess the following:

• BSc in Mechanical Engineering, or equivalent.
• Experience: Minimum 10 years within the Petroleum Industry
• Excellent knowledge of clients referential, international / local Codes & Standards and local regulations related to PVV discipline and excellent knowledge of Pressure Equipment Directive (PED).
• Pro-active with good organizational skills, team spirit, strong communication skills (verbal & written) and service minded.
• English language is mandatory, both spoken & written.
• Knowledge of AutoCAD, Pack Office and Acrobat.
• Knowledge of Microstation would be an asset

go to method of application »

QHSE

• Ensures HSE policy fulfillment during his activities.
• Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules.
• Is responsible to ensures compliance with HSE Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude.
• Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity.
  Contributes to achieve and improve HSE targets.
• Performs the updating of technical documentation.
• Gives his contribution in Hazard Analysis, incident investigations, Root Cause Failure Analysis, process incidents advising his hierarchy about HSE issues and proposing corrective solutions.

Main Activities

• Monitor equipment conditions using all indications available in the control room, on site, and portable test equipment.
• Diagnose equipment problems, report abnormal conditions to Electrical Supervisor, and prepare detailed work requests for plant defects.
• Organize and perform on site, the maintenance operations which are placed under his responsibility.
• Assist the preparation/planning team by giving any technical support for preparation of the jobs in his/her discipline.
• Manage intervention and prepare the technical reports related to the field.
• Reading blueprints and technical diagrams to determine the placement of outlets and fixtures.
• Maintenance of electrical systems in a power generating facility.
• Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus.
• Responsible for the quantity and availability of specific tools of his team.
• Take charge of the systems/equipment under his/her responsibility in case of breakdown until correct operation status.
• Identify recurrent corrective maintenance interventions, analyze them, and suggest improvements.
• Read, interpret, and implement technical information found in manufacturer's and OEM technical manuals, electrical and mechanical P & IDs, and operating and maintenance procedures.
• Prepare, maintain, and administer procedures and reports related to the operation, monitoring and maintenance of the plant; maintain accurate logs of daily operation, check sheets, change charts and ink recorders.
  Identify any recurring problems related to the availability or quality of spare parts.

Operations

• Provides Electrical support for assigned assets related power generation.
• Installs, inspects, troubleshoots, maintains, and repairs electrical equipment such as, but not limited to, motor control centers, generators, transformers, switches, relays, wiring, electrical signal and communication systems, variable frequency drive (VFD), power distribution center (PDCs), uninterrupted power source (UPS).
• Organizes on site the maintenance operations which are placed under his responsibility.
• Minimum of 6 years working experience in the power generation industry.
• Rotation 4x4

go to method of application »

MISSIONS

Operations:

• Organizes and performs on site maintenance operations, which are placed under his responsibility,
• His teams assist specialists working under Specific Maintenance Contracts (SMC),
• Ensures that the COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during the performance of maintenance operations placed under his responsibility,
• Ensures that all maintenance and repairs to plant and equipment are carried out safely and efficiently and in strict compliance with COMPANY operating procedures and any relevant statutory legislation to maintain all such equipment in sound and safe operating condition.
• Manages interventions using the CMMS,
• Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field,
• Monitors the functioning of systems placed under his responsibility,
• Ensures that the transfer of knowledge by mentoring occurs properly within his teams and actively participates in this himself,
• Carries out, at the Supervisor's request, any intervention within his field of competence.
• Takes charge of the systems under his responsibility in case of breakdown until correct operation status.

Methods:        

• Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements,
• Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements,
• Warns support teams of any recurring problems related to the availability or quality of spare parts and Suggests improvements and requests modifications.
• Verifies the quality of his teams’ interventions by frequent on-site checks,
• Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

Profile

The following knowledge will be essential for success in this position:

• SAP experience and know-how.
• Physical ability to work on offshore installations in the climatic conditions of the site.
• Basic knowledge of the process of oil and gas treatment and thorough knowledge of equipment used in oil and gas installations.
• Must know HL & LV power distribution and controls network, HV & LV motor drives and alternators, Inverters, HV cells, variable speed units, light networks, switch gears and Generators.

go to method of application »

MISSIONS: 

• Responsible for the health, safety and welfare of his team.
• Ensures that COMPANY’s HSE regulations are respected as well as approved operating procedures and standard industry practice under his responsibility
• Key interface with TOTAL Supervision to assist with the successful provision of support services to all site operations, monitoring performance compliance and reporting on progress.
• Manages day to day activities within his specific discipline
• Provides technical knowledge, expertise and supervision for welding, cutting and rigging
• Ensures works preparation before site works performance (survey, isometrics verifications, materials/tools preparation/supplies, access, lifting, prefabrications, logistics…)
• Follows performance of works on site
• Responsible of QA/QC for his discipline
• Inspects the performed works or follows inspection done by COMPANY
• Manages interventions using the CMMS and check intervention reports in this CMMS and write the technical reports related to his activity field
• Assists the planning team by giving any technical support for preparation of the jobs in his discipline
• In charge to manage, monitor and maintain the welding products & materials stored on site and ensures that all of these products & materials are in good conditions and free from defects – Replaces the unusable materials
• Ensures that the operations planned work scope is managed effectively in
  accordance with agreed targets to avoid disruption.
• Manages the specific team of technicians (welders, fitters, riggers …) 
• Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
• Undertakes any other duties which may be required (within individuals
  Competency) to ensure in the smooth running of the operation.
• Ensures that all daily, weekly and monthly reports are completed as required
• Ensure that all members of the team are focused on delivery of HSE and Quality plans.
• Ensures that all workers have the relevant qualifications and certificates to performed the required works through a specific register (with qualification matrix and relevant certificates dedicated to each workers)
• When existing in charge to manage the dedicated piping workshop (cleaning, materials/tools states , welding products/consumables storage, personnel individual means, protection, …)

Profile

• Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects.
• Experience and knowledge of metallurgy, welding procedure & specifications, and QA/QC related to his discipline.
• Specific professional knowledge: CMMS : SAP/R3.
• Ability to work in a large multinational team.
• Ability to work independently while maintaining good relations with colleagues and others.
• Physical ability to work on offshore installations in the climatic conditions of the site.

go to method of application »

MISSIONS: 

• To prepare scopes of work and ensure that all materials and equipment are available as and when required for modifications, repairs or maintenance activities.
• Prepares scopes of work for approved work programmes ensuring that all relevant operating procedures and safety regulations are written in and that all necessary materials and equipment are available as and when required.
• Prepares with COMPANY review and Validation, various calls for bid to contractors invited to tender for work to be carried out.
• Supervises the execution of modification works at site, or as required by his hierarchy, especially for works executed by external contractors.
• He ensures that proper COMPANY procedures are followed, and that all modifications are properly documented.
• Assists with the analysis of equipment malfunctions and makes recommendations for repair and future preventive action.
• Proposes and justifies recommendations for the improvement of equipment availability and/or efficiency, and works with other entities in Production Methods to execute desired modifications.
• Assists with the preparation of the preventive maintenance schedule for plant and equipment and ensures that planned work takes place.
• Ensures that all work carried out takes account of and follows all relevant COMPANY procedures and practices with specific regard to those governing the health and safety of personnel.
• Receives information from Production Operations on plant/equipment histories and maintains up-to-date records for all individual pieces of equipment.
• Ensures that all Equipment and Spare parts documentation are updated.
  Carries out any other ad-hoc duties as may be assigned by the Head of Maintenance and Inspection dept from time-to time.
• Checks the quality in performance of the modifications made by means of commissioning, starting up and audits.
• Under direction of COMPANY, Follows and analyses on-site spare parts stock levels ensuring they are adequate and maintained, and that materials/equipment received accord with specifications.

Profile

• CMIMS - UNISUP R/3 or SAP similar package
• Computer literacy is mandatory,
• ATEX directive awareness
• Ability to work onshore and offshore under the climatic conditions of the site,
• Ability to work in a multinational team