Job Opportunities at Hobark International Limited (HIL)

Job Description:

• Preparation and execution of assigned construction activities including but not limited to repair of pipelines, vessels, values, structures, well connections, modifications on production and processing facilities.
• Ensure compliance with Company referential, Procedures and Local regulations in the execution of contracts from receipt of SMR or notifications until handover to clients (Field Operations, Drilling, and Technical Logistics).
• Ensure optimal use of available resources within approved budget, timeline and with little or no re-work.

Requirements:

• Minimum Qualification: Bachelor’s degree in Mechanical, Petroleum, Structural, Civil or Electrical Engineering.
• 8 years’ experience in Engineering & Construction including Project Management Experience with at least 5 years relevant experience in Oil & Gas Production Facilities upgrade maintenance.

go to method of application »

Job Description:

• Organize all necessary resources required to prepare and execute all assigned projects.
• Organize and ensure execution of campaigns of works in line with the integrated operations planning.
• Supervise the execution of engineering studies, procurement, pre-fabrications and site construction of assigned projects.
• Ensure implementation of Company’s management policies in the execution of projects & campaigns.
• Supervise budget forecasting and planning for projects & campaigns under execution.

Requirements:

• Minimum Qualification: Bachelor’s degree in Mechanical, Petroleum, Structural, Electrical or Civil Engineering.
• Minimum of 10 years’ experience in Engineering & Construction including management of small/medium sized projects and contracting.

go to method of application »

Description:

Good diagnostic skills are required to troubleshoot problems. Operations Technicians are also required to plan work carefully, communicate effectively with their colleagues, and use information systems both as a source of data and to record what has happened.

Operations Technicians are expected to start up, control, monitor, and shut down as required and to maintain safe operations, and achieve production targets throughout.
As the production of oil and gas offshore is a 24-hour operation, Operations Technicians will work either dayshift or nightshift, alternating between shifts with each offshore trip or as and when required.

Networks with

• Shift Supervisor, Offshore Operations Supervisor, Offshore Safety Department, Technicians on same and other shifts, Contract staff and Vendor Representatives, Capabilities Team, Marine Team.

Accountabilities

• Maintain close liaison with the Control Room and perform operational actions requested by the Shift Supervisor, Control Room Technician.
• Complete daily logs and carry out watch keeping in area of responsibility.
• Carry out process plant isolations/de-isolations for safe handover to maintenance staff.
• Carry out first-line maintenance in area of responsibility.
• Endorse permits for work in area of responsibility ensuring no conflicts exist between operations and work to be undertaken.
• Maintain a daily handover log of significant events in area of responsibility and give a verbal handover to the on-coming Technician at the end of each shift to ensure safe operation and continuity.
• Complete a detailed trip handover document and give a verbal handover to the oncoming Technician at the end of each offshore trip.
• Mentoring of lower grade operators.

Health Safety and Environment:

• Be fully familiar with Company HSE policies and ensure compliance with these
• Fulfil all Emergency Response duties, as required
• Be fully aware of the installation Safety Case

Cost/Profit:

• Monitor and effectively control consumption of materials and consumables associated with production in area of responsibility

Operational Integrity:

• Maintain a vigilant lookout for faults on installation safety systems and process plant to ensure issues are captured and rectified in the shortest possible timescale
• Maintain required knowledge of all field safety and environmental regulations and operating procedures and maintain competency in the skills required to carry out the assigned role safely and efficiently
• To learn and understand all activities and processes associated with FPSO operations to a level that enables him/her to exercise good operational skills in all disciplines assigned to
• To act as a member of the Operations Support Team in Emergency Response situations, as and when required.
• Proving competency using the VQ Competence Framework will be as crucial as understanding the impact that Operations has on personnel, as defined in the Safety Case

Competencies Requirement

• E&P Business Competencies Level
• Written and verbal communication skills>>>Skilled
• Develop and manage alliances>>>Awareness

E&P Technical Competencies Level

• Operate wells and facilities>>>Skilled
• Maintain wells and facilities>>>Knowledge
• Technical integrity requirements>>>Knowledge
• Process Engineering Understanding>>>Awareness
• Operate Process/Utilities Facilities>>>Skilled
• Operate Deck and Cargo Facilities>>>Knowledge

HSE Competencies Level

• Offshore safety procedures>>>Skilled
• PTW system>>>Skilled
• Emergency Response>>>Skilled
• Safety Case>>>Knowledge

IT Competencies Level

• EP specific business applications>>>Skill
• Information management>>>Awareness

Awareness of failure investigation and root cause analysis.

• The role of Operations Technician requires the individual to be a self-starter, able to work with minimum supervision.

go to method of application »

Job Description:

• Ensure operability and process safety during construction, commissioning and start-up, and Operation.
• Develop and implement production strategies for specific operating units.
• Effectively translate production strategies into operational plans and ensure effective execution of operational plans.
• Provide personnel and leadership to plant facility projects to ensure they are properly incorporated into existing operations and executed in a manner that does not impact current operations.
• Establish and maintain a culture of an Incident and Injury Free (IIF) workplace.
• Manage performance of specific production units.
• Ensure effective utilization of all production services/support structures in Nigeria.

Requirement:

• Bachelors Degree in Chemical Engineering or Equivalent.
• Minimum of 15 years in refinery, petrochemical plant or gas processing.
• 10 years’ experience as a supervisor and 5 years in higher supervisory/management position.

go to method of application »

Job Description:

• Preparation of assorted pastries and Confectionaries.

Requirement:

• Minimum of SSCE with at least 5 credits.
• Possession of Basic First aid, Firefighting, HUET or BOSIET training certificates will be an added advantage Experience.
• Minimum of 4 years relevant experience in catering industry Onshore and Off shore.
• Positive attitude, self-motivated and ability to work under pressure with minimum supervision.
• Creativity and ability to pay attention to details.

go to method of application »

Job Description:

• Attends to detail and presentation of each order.
• Places and expedites orders.
• Prepares ingredients by following recipes; slicing, cutting, chopping, mincing, stirring, whipping and mixing ingredients; adding seasonings; verifying taste; and plating meals.

Requirement:

• Minimum of 3 years’ experience in a similar role.
• Diploma from a culinary school is added advantage.
• Knowledge of various cooking procedures for continental dishes and methods.
• Equipment knowledge.
• Ability to work in team.
• Good interpersonal and communication skills.
• Time Management.

go to method of application »

Job Description:

• Attends to detail and presentation of each order.
• Places and expedites orders.
• Prepares ingredients by following recipes; slicing, cutting, chopping, mincing, stirring, whipping and mixing ingredients; adding seasonings; verifying taste; and plating meals.

Requirement:

• Minimum of 3 years’ experience in a similar role.
• Diploma from a culinary school is added advantage.
• Knowledge of various cooking procedures and methods.
• Equipment knowledge.
• Ability to work in team.
• Good interpersonal and communication skills.
• Time Management.

go to method of application »

Job Description:

• Supervise catering operations and crew to ensure compliance with company standards of service at both offshore and onshore locations.
• Preparation of daily food cost returns.
• Undertake Inventory and stock control.
• Ensure good customer relations and satisfaction.

Requirement:

• Minimum of OND in Catering & Hotel management or related discipline.
• Possession of Basic First aid, Firefighting, HUET or BOSIET training certificates will be an added advantage.
• Minimum of 5 years relevant experience in the catering industry, preferably Offshore.
• Good computer skills with knowledge of Daily food cost returns, and Inventory and stock control.
• Positive attitude, self-motivated and ability to work under pressure with minimum supervision.
• Excellent communication, leadership and Interpersonal skill.

go to method of application »

Job Description:

• Responsible for the overall supply chain management.
• To Lead, Manage and Participates in developing, interpreting, and implementing Logistics policies and procedures for effective support and successful project delivery.

Requirement:

• HND / B.Sc. Social Science.
• Minimum of 10 years’ experience.
• Professional membership an added advantage.
• Experience in Oil and Gas project or construction industries with contracting responsibilities

go to method of application »

equirement:

• Minimum of Bachelor of Science degree in a core engineering discipline with a minimum of Second Class Upper division.
• A master’s degree in any of the relevant Engineering disciplines will be an added advantage.
• A minimum of ten (10) years of relevant experience in an E&P company.
• Must be capable of utilizing engineering and operational principles to resolve problems and identify hydrocarbon production enhancement opportunities.
• Must be capable of working with multi-functional teams in project execution.
• Must have ability to plan, lead and execute development projects.
• Must be able to work under pressure.
• Must be very analytical and capable of delivering results.
• Must have strong interpersonal skills to work in a multidisciplinary teams.
• Maintains safe and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.
• Provide support in the planning and execution of maintenance & major shutdowns, managing the commissioning and startup of new projects and plant modifications.
• Support Drilling and Production Operations as appropriate.

go to method of application »

As a rigger, you will be required to prepare the materials before loading, set up the rigging equipment, operate heavy equipment machinery, and dismantle the rigging after the job. You will also be required to communicate with the rigging team and ensure compliance with state health and safety regulations.

RESPONSIBILITIES

• Inspecting and preparing loads that needs to be moved
• Setting, aligning, and leveling heavy equipment machinery.
• Selecting the appropriate rigging gear.
• Preparing rigging equipment including beams, pulleys, clamps, and bolts.

REQUIREMENTS

• Bachelor's Degree
• 3+ years working experience as a rigger
• Familiarity with OSHA Safety standards
• In-depth knowledge of rigging equipment and heavy machinery

go to method of application »

Job Summary

• The Technical Assistant will provide administrative and technical support to the Company to ensure the highest standards and efficient running of the office.
• He/She Will ensure that technical and administrative tasks are completed in a timely manner to support the technical personnel in the delivery of the specific piece of work or project.
• He/She will also ensure governance and compliance with legislation and industry standards and provide strategic advice in consultation with key stakeholders.

Job Responsibilities

Technical:

• Generally responsible for the office from a technical and administrative standpoint.
• Periodically review, update and clarify the Group and Subsidiaries’ strategies with clear deliverables and actionable implementation timelines.
• Work closely with the COO to midwife and superintend new initiatives and business strategies / growth areas within the Group.
• Support technical personnel with project support duties.
• Conduct research, create reports and maintain records with a view to produce relevant and accurate statistics necessary for decision making.
• Provide input to technical studies/research projects, technical reports, project planning, etc.
• Undertake data analysis, identify and investigate variations.
• Develop and maintain technical databases and spreadsheets.
• Establish, develop, and maintain electronic filing systems.
• Respond to external requests for information.
• Liaise with internal and external customers.
• Control internal and external documentation.
• Handle confidential and sensitive information.
• Take phone calls relating to complex projects
• Perform other related duties as required

Man Specification

• Minimum of B.Sc/HND plus M.Sc./MBA
• Minimum of 5 years’ senior management experience in a similar role

go to method of application »

Minimum Education & Experience

• Higher National Diploma (HND)
• 2 years working experience in oil and gas or petrochemical handling industry
• Demonstrated proficiency in computer skills, including typing and use of Microsoft Office Products

Key Job Responsibilities

• Assists Engineers in compiling reports, bid documents and contracts.
• Prepares spreadsheets for tasks such as material ordering, corrosion investigations etc.
• Provide routine clerical and administrative duties
• Should be capable of using computer software for drafting: AutoCAD, etc.
• Familiar with the use of specifications and standards

go to method of application »

Description:

Education Qualification: University Engineering Degree (Mechanical) – 2nd Class Honours

Professional Qualification:

• Experience Minimum twenty (20) years relevant experience with an oil industry design and fabrication contractor
• Must have worked in as a mechanical engineer/senior mechanical engineer for an Operator and have been involved in both onshore and offshore projects
• Must be used to working in a multi-discipline environment
• Must have worked in an expatriate situation for at least five (5) years
• Age 45+

KEY COMPETENCIES REQUIREMENTS:

• Functional/ Technical: Good understanding of project management controls and procedures.
• Ability to work under pressure against tight deadlines whilst maintaining a high standard of consistency and accuracy.
• Solid working knowledge of oil and gas industry mechanical engineering codes and standards.
• Have thorough knowledge of the design of onshore and offshore oil production facilities
• Have the ability to utilise common process and mechanical design software for systems design and analysis
• To provide input to Front End/Conceptual Engineering studies with respect to mechanical design aspects
• To establish and maintain a facilities mechanical installations database
• Provide input to Integrity Management and Planned Maintenance planning
• Sound understanding of HSES management systems and the application thereof, particularly with respect to design integrity and safety.
• Ability to manage interfaces both internally and externally with contractors
• Apt reporting skills with the ability to write well structured and easily understood reports
• Able to prepare and deliver effectively presentations for information dissemination both internally to management and externally to 3rd parties
• Fluent spoken and written English.
• Strong interpersonal skills, able to deal with a broad spectrum of cultural and organisational styles
• Basic computer literacy (MS Word, Excel, Project, Lotus Notes, PowerPoint)

go to method of application »

Job Description:

• Check customer's credit situation.
• Recommend whether to offer or decline credit request(s) - he can recommend but not decide.
• Deal with internal and external queries about payments, ensuring customers pay on time and negotiate re-payment plans.
• Ensure that all transactions are compliant with Company's policies and relevant National regulations
• Handle disputed bills and negotiate to bring payment within the agreed terms

Requirements:

• Excellent negotiation skills.
• Excellent written and verbal communication skills.
• Strong analytical skills and good attention to detail.
• Good problem-solving skill.
• Competency with ERP systems.
• Good supervisory skills.

go to method of application »

Job Description:

• Receive payment schedule from Accountant, compute withholding tax deductible and add the account details, make payment to the beneficiaries and share with all concerned parties.
• Prepare payment instructions/cheques for signature by the authorized signatory.
• Entering of all payments made on Sage ERP.
• Entering of all reconciling items from bank reconciliation exercise on Sage ERP.
• Receive schedules of VAT, PAYE, CIT, ITF, NSITF, Pension payables, and process payment as and when due.
• Receive and retain receipts of all statutory payments.
• Awareness, understanding and application of QMS, EMS and OHS policies on assigned jobs.
• Awareness of the implications of not conforming with SECRL EMS and OHS requirements including associated aspects and risks for the process assigned.

Requirement:

• BSc in Finance or Accounting.
• Professional Qualification ACA, ACIT, ACCA will be an added advantage.
• A Master’s degree in business administration or finance will be an advantage.
• Minimum of 5 years of relevant experience in upstream oil and gas business, and in-depth knowledge of accounting principles.
• Finance professional with experience in Treasury and with experience of Accounts receivables/ Accounts Payable and Payment services.
• Proficient in using Microsoft Office, Word, Excel and PowerPoint.
• Ability to exhibit poise, composure and confidence when confronting stressful or high-pressure situations.

go to method of application »

Job Description:

• Manage Client’s Group of companies’ tax obligation/exposure across its operations including intra-group;
• Optimize its tax opportunities including strategies for business growth
• Ensure compliance with tax regulations to prevent risks of default

Requirements:

• Bachelor’s degree in Accounting or related discipline
• Minimum of 8-10 years’ experience in Tax Practice & Management with at least 3 years tax experience on a managerial position
• ACCA, ACA or ACIT Certified
• Experience/knowledge of Oil & Gas industry taxes (conventions, norms and practice including petroleum profit tax) will be an added.

go to method of application »

Job Description:

• Accountable for administrative, financial and risk management operations of the Company through development of a financial and operational strategy
• Ensures the provision of detailed financial data, as well as relevant, accurate and prompt analysis and recommendations required for daily business and financing decisions.
• Ensures the integration of both operational and financial measures aimed at efficiency, growth and profitability of the business in the long-term.
• Manages Company’s asset, debt, cost and profitability position and establishes an appropriate framework for the prompt rendition of returns/dividends to investors, and for repayments of short and long-term debt to financial creditors.
• Implement the QMS as defined by the manual and related procedures.
• Obtain and communicate customer requirements to the appropriate personnel or functional organization.

Requirement:

• B.Sc Financial Management / Accounting Field.
• Fellow / Certification of a professional financial body is a must (ACCA, or ICAN).
• Master’s in Accounting, Finance is advantage.
• 10 years in senior position.
• Proven Experience in Financial Analysis, Financial Reports and Large Budgets.

go to method of application »

Responsibilities

• Monitor the day-to-day financial operations within the company (payroll, invoicing, and other transactions)
• Prepare monthly and quarterly management reporting
• Participate in strategic data analysis, research, and modeling for senior company leadership
• Support project analysis, validation of plans, and ad-hoc requests
• Manage the company's financial accounting, monitoring, and reporting systems
• Ensure compliance with accounting policies and regulatory requirements

Qualifications for Finance Manager

• Bachelor's degree in Finance or Accounting; CPA a plus
• 5-8 years of experience in accounting and/or financial analysis
• Ability to synthesize large quantities of complex data into actionable information
• Ability to work and effectively communicate with senior-level business partners
• Excellent business judgment, analytical, and decision-making skills
• Knowledge of financial reporting and data mining tools such as SQL, Access, etc.
• Strong demonstrated use of Excel, Word, and PowerPoint

go to method of application »

Description:

• Preparing completion planning and programs in accordance with the development strategy as per COMPANY policies and standards.
• Establish and maintain close liaison with the subsurface team, project, and operations groups to ensure effective integration of well programs in the overall development plan.
• Responsible for proper application of cost and schedule controls and analysis of drilling and completion trends to determine efficiency and cost improvements, within project objective/goals.
• Coordinate CWOPS, AAR of completion and workover operations to identify improvement opportunities for future programs.
• Assisting in the development of operating plans and annual budgets by ensuring that cost estimates accurately reflect the intended project scope.

Requirements:

• Minimum of 10 – 15 years’ relevant experience in Completion and Well intervention planning and operations.
• University level education (minimum Second Class Upper degree) in Engineering Discipline.
• Current International Well Control Certificate (IWCF).

go to method of application »

Description:

• To monitor the implementation of the approved Contractor and sub-contractor project HSE plan and referenced procedures including bridging documents
• Participate in Risk Assessment and SERVICE Safety Analysis studies dedicated to construction operations in hands and ensure they comply with related General Specifications and Guide manuals.
• Monitoring and reporting the Health, Safety and Environmental performance of the Contractor and its sub-contractors on site.
• Undertake site HSE audits & inspections, and ensure corrective action recommendations are conclusively closed-out.
• Ensure Hazard identification/reporting, accident reporting and investigation are continuously undertaken
• Participate in the site emergency preparedness and follow-up the improvement measures undertaken after the regular exercise.
• Take part in the preparation and attend the meetings of the site HSE committees
• To focus on the early identification of potential problems and to propose appropriate solutions to HSE Superintendent.
• To attend regular meetings with contractors’ HSE representatives to discuss and agree on HSE concerns and potential hazards.
• To be proactive in promoting HSE awareness at all levels within the project team and contractor personnel.

go to method of application »

Description:

• To monitor the implementation of the approved Contractor and sub-contractor project HSE plan and referenced procedures including bridging documents
• Participate in Risk Assessment and SERVICE Safety Analysis studies dedicated to construction operations in hands and ensure they comply with related General Specifications and Guide manuals.
• Monitoring and reporting the Health, Safety and Environmental performance of the Contractor and its sub-contractors on site.
• Undertake site HSE audits & inspections, and ensure corrective action recommendations are conclusively closed-out.
• Ensure Hazard identification/reporting, accident
• reporting and investigation are continuously undertaken
• Participate in the site emergency preparedness and follow-up the improvement measures undertaken after the regular exercise.
• Take part in the preparation and attend the meetings of the site HSE committees
• To focus on the early identification of potential problems and to propose appropriate solutions to HSE Superintendent.
• To attend regular meetings with contractors’ HSE representatives to discuss and agree on HSE concerns and potential hazards.
• To be proactive in promoting HSE awareness at all levels within the project team and contractor personnel.

go to method of application »

Job Description:

• Monitor equipment operations to ensure compliance with safety regulations.
• Advise and Educate plant workers on Safety practices.
• Enforce stop work authority where safe practices are not being observed.

Requirements:

• Minimum Education & Experience; Ordinary National Diploma (OND) with related training and 3 years related experience, preferably in the oil and gas industry.
• Recognized Safety Training Certificate/Knowledge of Safety Standards and Systems.

go to method of application »

Job Details

• Compile safety reports and conduct safety audits.
• Ensure implementation of safe work practices.
• Monitor equipment operations to ensure compliance with safety regulations.
• Advising and educating plant workers on Safety practices.
• Enforce stop work authority where safe practices are not being observed.

Requirements:

• Minimum Education & Experience.
• Higher National Diploma (HND) with related training and 5 years’ experience in the oil and gas industry.
• Recognized Safety Training Certificate/Knowledge of Safety Standards and Systems.
• Safety related supervision skills.
• Demonstrated proficiency in MS Office Suite Applications (PowerPoint, Excel, Word, and Outlook), Networking Applications, Windows / NT Operating Systems, Adobe Professional Suite, and web based applications.

go to method of application »

Applicant should possess adequate requirement

go to method of application »

Job Description:

• Development, communication and implementation of Project HES management plan.
• Owning CONTRACTOR safety management process and monitoring CONTRACTOR performance.
• Manage incident investigation, analysis and reporting process.
• Provide technical guidance and assistance on a wide variety of HES topics including safe work practices, safety in design, risk management, industrial and environmental management. 

Requirements:

• Minimum Education & Experience.
• Bachelor’s Degree in Engineering .
• 10 years of related HES experience in engineering and construction activities with at least 5 years’ experience in oil field, petrochemical, or oil and gas handling projects.
• Competence in risk based design including management of quantitative risk assessments.
• Environmental Impact Assessments including modifications to design and development of Environmental Management Plans.
• Operational experience to understand the HES requirements within a project’s design to achieve Operational Excellence.
• Occupational Health and Safety in a fabrication or offshore location.
• Demonstrated experience working on at least 3 projects of at least $15 MM total construction contract value.

go to method of application »

Applicant should possess adequate requirement

go to method of application »

Job Description:

• To monitor the implementation of the approved Contractor and sub-contractor project HSE plan and referenced procedures including bridging documents 
• Participate in Risk Assessment and SERVICE Safety Analysis studies dedicated to construction operations in hands and ensure they comply with related  General Specifications and Guide manuals. 
• Monitoring and reporting the Health, Safety and Environmental performance of the Contractor and its sub-contractors on site. 
•  Undertake site HSE audits & inspections, and ensure corrective action recommendations are conclusively closed-out. 
•  Ensure Hazard identification/reporting, accident reporting and investigation are continuously undertaken 
•  Participate in the site emergency preparedness and follow-up the improvement measures undertaken after the regular exercise. 
•  Take part in the preparation and attend the meetings of the site HSE committees 
•  To focus on the early identification of potential problems and to propose appropriate solutions to HSE Superintendent. 
• To attend regular meetings with contractors’ HSE representatives to discuss and agree on HSE concerns and potential hazards.
• To be proactive in promoting HSE awareness at all levels within the project team and contractor personnel. 
• To monitor the implementation of control measures identified during risk analyses while carry out the construction activity. 
• To assist in the investigation of accidents and incidents to determine their underlying causes, report anomalies and check corrective actions. 
• To monitor the implementation of actions arising from incident, accident, audit and inspection analyses 
• To check first aid materials and equipment are available on the sites 
• To carry out any other duties or tasks that may be assigned by his hierarchical superiors.

Requirements:

• Graduate Bachelors Degree (BSc) or equivalent in any engineering or physical science, and formal training in HSE with recognized qualification or certification. 
• Minimum 5 years working experience in the Oil and Gas production projects, with minimum 3 years of similar HSE responsibilities. 
•  Knowledge of risk assessment techniques and experience at organising HAZOPS, HAZIDS, HAZAN and other reviews.
• Administrative skills including proficiency in typical office applications (Words, Excel, PowerPoint, etc). 
• Fluent in English language and ability to communicate well at all levels within the Company.
• In addition, the candidate must possess very good planning, presentation, negotiations and organizational skills.
• Ability to work on rotation bases.

go to method of application »

Minimum Education & Experience

• Bachelors Degree in Engineering
• Registered Professional Engineer (or non-USA equivalent)
• 15 years of related HES experience in engineering and construction activities
• 8 years of experience in oil field, petrochemical, or oil and gas handling projects
• Competence in risk based design including management of quantative risk assessments
• Environmental Impact Assessments including modifications to design and development of Environmental Management Plans
• Operational experience to understand the HES requirements within a project’s design to achieve Operational Excellence
• Occupational Health and Safety in a fabrication or offshore location
• Demonstrated experience working on at least 3 projects of at least $15 MM total construction contract value

Key Job Responsibilities

• Development, communication and implementation of Project HES management plan
• Owning CONTRACTOR safety management process and monitoring CONTRACTOR performance
• Manage incident investigation, analysis and reporting process
• Provide technical guidance and assistance on a wide variety of HES topics including safe work practices, safety in design, risk management, industrial and environmental management

go to method of application »

Applicant should possess adequate requirement

go to method of application »

Job Description:

• Build capacity and capability within Security to ensure strength in a Threat led organization across IDENTIFY, PROTECT, DETECT, RESPOND model
• Own and manage the HSSE Risk Register and work with other departments to ensure HSSE risk is mitigated
• Own HSSE Crisis management function and ensure regular simulations are carried out to demonstrate resilience
• Regularly review and update Base, Site and Project HSSE plans. Ensure proper threat and risk monitoring is in place
• Build relationships with senior Government Security Forces (GSF) from the respective agencies within their Area of Responsibility (AOR);

Requirements:

• Bachelor's degree in Social Sciences, or other related fields.
• Additional qualifications in Security / HSE is a distinct advantage.
• 10+ experience in security management, with at least 2 years in HSE or related function.
• Proficiency in Microsoft Office programs (Word, Excel, Outlook, and PowerPoint).
• Excellent organizational, interpersonal, written & communication skills are required.
• Ability to maintain strict confidentiality.
• Knowledge of the oil & gas and EPCIC industry is desirable.

go to method of application »

Job Specifications:

• Interface with clients, superintendents, class surveyors and owners’ agents as required for projects.
• Ensure vessel specifications are complete including obtaining copies of all technical drawings.
• Manage the Security of all clients & client material on the work site.
• Manage and maintain the Security Clearance of all “visitors” to and from vessel.
• Attend and coordinate Periodic Safety meetings as part of Shipyard staff.

Requirements:

• Minimum 10 years’ experience as a ship manager or other management level responsibilities in a heavy steel manufacturing environment, Shipyard and Marine background.
• Proficient in the use of P3 and other Planning/Reporting software.
• Ability to lead and direct multi-disciplined and multi-cultural teams.

go to method of application »

Job Specifications:

• Lead and develop best in class project services, procedures, processes, systems, and models for the Project from conception through to operation.
• Develop and provide project management systems (Development Delivery Process, Electronic Project Management System), services and resources for the project.
• Manage the Project Services group (Cost, Planning, Document Control and Supply Chain)
• Owner of the system design (basis of design) from wellhead to export – ensuring consistency across all disciplines and project areas.
• Promote effective communication and innovative challenge within the engineering disciplines in order to foster the production of safe, cost effective, fit for purpose and constructible designs. 

Requirements:

• Minimum 10 years’ relevant experience of oil and gas offshore field development projects
• Experience in a client and/or contractor leadership role
• Leadership and management of integrated project services teams
• Must have relevant West African FPSO experience in a leadership role.
• Conductor Supported Platform installation experience.

go to method of application »

Job Specifications:

• Responsible for the preparation of close out in line with COMPANY procedures.
• To work closely with all other COMPANY team members and contractor counterparts to ensure correct information is transmitted and fully aligned.
• Responsible for reconciling on monthly basis all SO/SOR data with Contractor.
• Support Cost Control and Contracts leads in providing information needed for PMT reporting and Change Management Process.
• Work as back-to-back for the Cost controller when needed as required by PCM.

Requirements:

• Minimum of 5-10 years’ of career experience in a similar job position.
• Must possess a graduate degree like BBA/MBA with strong cost background especially in management of cost reduction and cost control areas.
• Working knowledge of oil and gas especially subsea activities will be appreciated although not absolutely necessary.

go to method of application »

Job Specifications:

• Responsible for forecasting and reporting all service-related work in coordination with drilling, services team at Onne and the delivery team including UFR and FPSO package.
• Responsible for reviewing Contractor’s estimates of SORs, preparing, and following up of all Service Orders along with internal approval sheets.
• Responsible for verifying the WEN’s, the Cost Sheets and Services invoices and maintaining the SO/SOR registers with invoiced status.
• Responsible for reducing Services costs by checking/challenging invoicing methods used by Contractor if not in line with the Contract, proposing methods to reduce Services cost by finding alternative means.
• Assist PCM in the preparation of 3 months rolling, yearly and Project to Complete forecasts of Provisional Sum utilization.

Requirements:

• Minimum of 5-10 years’ of career experience in a similar job position.
• Must possess a graduate degree like BBA/MBA with strong cost background especially in management of cost reduction and cost control areas.
• Working knowledge of oil and gas especially subsea activities will be appreciated although not absolutely necessary.

go to method of application »

ob Specifications:

• Develop and provide strategic thrust, policies, and systems for effective HSE management that enables the change of the HSE culture and behaviour across the Organization.
• Accountable for establishing HSE corporate performance metrics and Compliance Management & Reporting making sure the company achieves and surpasses statutory targets, regulations, and standards for oil/gas industry. Provide assurance to the business and stakeholders to the effect that HSE management & controls are consistent with set standards and policies.
• Manage the build-up and performance monitoring of Functional HSE budget in liaison with HSE Business Support Unit.
• Provide required resources and direct their effective deployment to guarantee effective delivery of the HSE-MS. 

Requirements:

• Relevant First degree in Engineering or Technical Sciences.
• Must possess a NEBOSH Certification.
• Minimum operational and corporate experience of 10 years managing HSE in E & P. operations with at least 10 years in a senior HSE critical role.

go to method of application »

Job Specifications:

• Ensure quality plans are in place through robust technical assurance in all stage gate reviews as well as the annual business planning cycle.
• Ensure the application of current technology to field evaluations by construction of accurate & representative static and dynamic models of the subsurface.
• Ensure that high quality seismic interpretation is integrated into projects.
• Prepare field studies including estimates of reserves, fluid contacts, reservoir distribution and structural configuration.
• Prepare/maintain static geologic models for assigned fields that including structural configuration and reservoir distribution for field development planning and volumetric assessment. 

Requirements:

• Minimum 10 years in E&P environment the subsurface/wells knowledge and experience including reservoir engineering, well engineering, exploration geology, geophysics and geomatics, operations geology, production engineering and reservoir management.
• An understanding and appreciation of the capital projects and operations disciplines and how they interact with subsurface/wells function.

go to method of application »

Job Specifications:

• Identify and deliver improvements in efficiency of maintenance, integrity, engineering and related HSE processes/activities to optimize maintenance/operational life cycle costs in line with company’s strategies and KPI’s.
• Develop application and fully implement risk and reliability management techniques, like RBI, RCM and IPF.
• Provide Technical support for discipline engineering, relevant maintenance disciplines and projects, and manage change control. Maintain healthy and competent capability of Tasks.
• Develop where needed and implement risk-based inspection programs to improve asset integrity with a strong focus on safety, cost containment and integrity.
• Develop asset integrity conditioning monitoring strategies and programs for loss containment purposes including corrosion monitoring and all issues, which have potential to impact asset integrity, including equipment/hardware, process/procedures, and operational business systems.

Requirements:

• Engineering degree in Mechanical, Electrical, Chemical, Corrosion or Metallurgy.
• Certified API Inspector in pressure Vessels (510) and piping 570 with knowledge in NDT (MPI/DPI/UT/RT) inspection, testing and data evaluations/Analysis. Certified LEEA inspector, IRATA Certified. Knowledgeable in H&L Equipment handling (Cranes, Davits, CCUs, Winches etc.) in line with DPR guidelines and Factory Act. CAP 24-26.
• 10+ years’ experience required in the oil & gas industry both offshore and onshore. Experience in West Africa is a plus.

go to method of application »

Job Specifications:

• To execute maintenance activities to enable production of specification crude in line with the company forecasts and reporting to the Maintenance Supervisor.
• To follow company procedures and reporting explicitly.
• To execute maintenance operations on various production equipment. Report findings in a clear manner. Bring any deviations from the more normal situation to the supervisor’s attention.
• Maintain intimate knowledge of all producing assets, ideally in the process area and well locations. In the least, there should be an in-depth knowledge of the equipment in the area the production operator is assigned to and report the equipment/facilities conditions and any observations promptly to line Supervisors.
• Ensure that the execution of maintenance activities is in line with maintenance procedures. Where procedures are difficult to follow suggest modifications to improve the operation. 

Requirements:

• Must possess a qualification in an Engineering.
• Minimum of 5 years hands on experience.
• Oil & Gas exposure.

go to method of application »

Job Specifications:

• Lead the review operational processes, policies, standards, and procedures documentations.
• Coordinate the development and implementation of the drilling risk assessment for field activities.
• Review well cost performance with operations team and develop contractual strategy / methods of reducing cost exposures in well operations across the assets.
• Manage Drilling and Completion contracts across the assets by ensuring that the right set of tools are called-off from the appropriate contract without exceeding the ceiling value and the contract validity.
• Coordinate Drilling and Completions input during FDP and well proposal stage across the assets in line with D & C well delivery process.

Requirements:

• A degree qualification in Engineering.
• A minimum of 15 years industry experience with an Operating Company.
• Highly experienced in contracts and project management, front-end well engineering design.

go to method of application »

Job Specifications:

• This individual shall provide the following the services:
• Capable of performing task and assessing weather conditions to ensure safety of ROV and crew.
• Ability to co-ordinate dive records, video, audio, and written format.
• Demonstrate a working knowledge of company QA and associated procedures.
• Ensure the trencher is set up as detailed in the trenching procedure.
• Understanding of Jet trenching theory and effects of trencher configuration and water pressure/flow in different soil types.

Requirements:

• Minimum of 10 years of career experience in a similar position.
• Must possess relevant qualifications in an engineering discipline to a minimum of HNC standard or time served technician with final City & Guilds certificate or equivalent.
• Must possess technical and operational knowledge of ROV/Trenching systems.
• Must possess good knowledge of current safety and quality standards as applied to systems and their requirements in an offshore environment.

go to method of application »

Job Specifications:

• Adherence to the processes and systems present within the Company's Business Management System.
• Assist departments in identifying corrective and preventative actions when looking at continual improvements.
• Monitor inspection and verification of equipment (including documentation) supplied.
• Checking of contractor and main sub suppliers’ material control management and ensuring of traceability of material certificates and of NDT control.
• Lead and guide inspection services in line with Project/Contract requirements.

Requirements:

• Engineering qualification and background.
• Quality Management Knowledge with a minimum of 10 years in lead Quality Assurance positions.
• Materials management knowledge.
• Must have worked or coordinated a materials management team.
• Experience in materials auditing and certification is necessary.

go to method of application »

Job Specifications:

• Ability to work in conjunction with existing Well Engineering and Logistics Staff to ensure smooth running of rig operations.
• Ensure COMPANY materials are being stored correctly and maintained in good condition.
• Work with COMPANY appointed QAQC Inspector to carry out audits and inspections Offshore and at COMPANY and Vendor locations.
• Supervise and implement approved QA/QC procedures for all Well Engineering service contractors. Ensure complete delivery.
• Develop a thorough understanding of the approved HSSE elements of service contractors’ QA/QC procedures and ensure strict compliance with same.

Requirements:

• Minimum of bachelor’s degree in a relevant discipline.
• Minimum of 5 years’ experience relevant to this scope.
• Must have track record of inspection of machine shops jobs, rental tool, service company equipment and drilling rig parts / activities.
•  Good working knowledge of relevant API and ISO Standards.