Job Opportunities at Hobark International Limited (HIL)

ob Description:

• Mechanical equipment and welding inspection in accordance with standard procedures and established schedules.
• Conducts all phases of routine repetitive inspections for existing piping systems and facilities.
• Inspection of repairs and modifications, and inspection of new construction for compliance with specifications, drawings, codes and craftsmanship.
• Prepares inspection reports with recommendations for corrective action.
• Consults with Maintenance Supervisor, Equipment Inspector, Maintenance Team Leader, or Project Engineer as needed and then reviews reports with operating, maintenance and construction personnel and provides technical counsel on corrective methods and techniques.
• Coordinates equipment repair plans with operating and maintenance personnel.

Requirement:

• Higher National Diploma (HND) or equivalent with related training and 9 years’ experience in the oil and gas industry.

go to method of application »

Job Description:

• Under direct supervision, prepares minor engineering design drawings conforming to applicable codes, specifications, and standards.
• Perform miscellaneous clerical duties.

Requirement:

• Associates Degree with 2 years of upstream oil and gas design experience, OR.
• High school graduate with 4 years of equivalent technical experience of which 2 years are in upstream oil and gas design.
• A thorough working knowledge of AutoCAD 2000i and the Rebis design packages are a requirement.
• Ability to work in dual units (English and SI) is a requirement.
• A working knowledge of MS Office Products.

go to method of application »

:

Job Description:

• Under general supervision, develops engineering design drawings conforming to applicable codes, specifications, and standards.

Requirement:

• Associates Degree with 3 years of upstream oil and gas design experience, OR.
• High school graduate with 5 years of equivalent technical experience of which 3 years are in upstream oil and gas design.
• A thorough working knowledge of AutoCAD 2000i and the Rebis design packages are a requirement.
• Ability to work in dual units (English and SI) is a requirement.
• A working knowledge of MS Office Products.

go to method of application »

ob Description:

• Assist in maintaining project controls.
• Develop highly complex conceptual designs.
• Coordinate the design of facilities, systems, and equipment related to disciplines (i.e., structural, piping, electrical, instrumentation, and mapping) under a minimum amount of supervision. May assume the responsibility of discipline lead designer.

Requirement:

• Undergraduate degree with 5 years of upstream oil and gas design experience, OR .
• Associates Degree with 8 years of upstream oil and gas design experience, OR.
• No degree with 10 years of equivalent technical experience of which 8 years are in upstream oil and gas design.
• Senior piping designers will have experience in structural design and mapping.
• A thorough working knowledge of AutoCAD 2000i and the Rebis design packages are a requirement.
• Ability to work in dual units (English and SI) is a requirement.
• A working knowledge of MS Office Products.

go to method of application »

Job Description:

• Supervise the planning, management and coordination of activities associated with the fabrication of oil and gas facilities for the COMPANY’s work program under a minimum of supervision.
• Active liaison between various groups in the project, including engineering, construction and installation contractors, operations local communities.
• Embrace and apply COMPANY’s Capital Stewardship, Operational Excellence and CPDEP processes and tools.
• Responsible for ensuring adherence to Corporate and Project environmental and safety management programs.

Requirement:

• Undergraduate degree with 5 years of upstream oil and gas design experience, OR.
• Associates Degree with 8 years of upstream oil and gas design experience, OR.
• No degree with 10 years of equivalent technical experience of which 8 years are in upstream oil and gas fabrication shop supervision.
• Ability to read design drawings and explain the contents to others.
• Ability to work in dual units (English and SI) is a requirement.
• Working knowledge of MS Office product.

go to method of application »

Job Description:

• Manages the overall development, standardization and implementation of corrosion monitoring, protection, and remediation processes such as chemical corrosion inhibition, cathodic protection, corrosion coupons and probes, metallurgical selection, protective coatings, and NDE programs.
• Develops and implements shaping plans to move towards a world class corrosion inhibition process.
• Implement and manage systems to monitor and analyze corrosion data, NDE test results and other readings.
• Develop recommendations based on data.
• Develop and report on key corrosion metrics, including failure rate, failure rate, failure cost and corrosion related spills and lost production.

Requirement:

• Higher National Diploma (HND) or equivalent with related training and 9 years’ experience in the oil and gas industry.

go to method of application »

Job Description:

• Conducts welding inspection in accordance with standard procedures and established schedules.
• The Welding Inspector must ensure Contractor is adhering to the Company’s SOP’s and proactively correct any noted infractions or deviations.
• The Welding Inspector shall follow up on any outstanding or punch list items or concerns as related to their discipline and provide timely reports to project team members as required.

Requirement:

• Higher National Diploma (HND) or equivalent with related training and 9 years’ experience in the oil and gas industry.

go to method of application »

Job Description:

• Responsible for monitoring Contractor's daily work regarding protective coatings integrity.
• Responsible for ensuring that the safe execution of their work as well as the Contractor's coating crews.
• The Coating Inspector must ensure that the work within his/her control is safe, cost-effective, and timely.
• Individual must be able to immediately recognize coating issues and have a working knowledge of the project specifications, as well as the referenced industry standards, to apply in the shop or field.
• The Coating Inspector must ensure Contractor is adhering to the Company’s SOP’s and proactively correct any noted infractions or deviations.
• The Coating Inspector shall follow up on any outstanding or punch list items or concerns as related to their discipline and provide timely reports to project team members as required.

Requirement:

• Higher National Diploma (HND) or equivalent with related training and 9 years’ experience in the oil and gas industry.

go to method of application »

Job Description:

• Responsible for conducting mechanical equipment inspection in accordance with standard procedures and established schedules.

Requirement:

•  Bachelor’s Degree in Engineering with minimum 12 years’ experience in the oil and gas industry, OR.
• Higher National Diploma (HND) with related training and 12 years’ experience in the oil and gas industry.
• Demonstrated conceptual and practical understanding of Mechanical Structures and Equipment.

go to method of application »

Job Description:

• Conducts Bathymetric (Hydrographic) and Topographic Surveys using his own means (Personnel and Equipment) in order to measure and monitor execution of the works in accordance with the design and specifications.
• Bathymetric and Topographic Surveys will also be used to determine the progress of the execution of the works.
• Bathymetric Surveying has to be conducted in accordance with Project’s specifications, Bathymetric (Hydrographic ) Surveying and with Dredging Contractor’s equipment.

Requirement:

• Bachelor’s degree in Engineering or equivalent.
• 9 Years of related experience.
• 5 years working experiences in a major oil field, petrochemical, or oil and gas handling projects.

go to method of application »

Job Specifications:

• Adherence to the processes and systems present within the Company's Business Management System.
• Assist departments in identifying corrective and preventative actions when looking at continual improvements.
• Monitor inspection and verification of equipment (including documentation) supplied.
• Checking of contractor and main sub suppliers’ material control management and ensuring of traceability of material certificates and of NDT control.
• Lead and guide inspection services in line with Project/Contract requirements.

Requirements:

• Engineering qualification and background.
• Quality Management Knowledge with a minimum of 10 years in lead Quality Assurance positions.
• Materials management knowledge.
• Must have worked or coordinated a materials management team.
• Experience in materials auditing and certification is necessary.

go to method of application »

Job Specifications:

• Ability to work in conjunction with existing Well Engineering and Logistics Staff to ensure smooth running of rig operations.
• Ensure COMPANY materials are being stored correctly and maintained in good condition.
• Work with COMPANY appointed QAQC Inspector to carry out audits and inspections Offshore and at COMPANY and Vendor locations.
• Supervise and implement approved QA/QC procedures for all Well Engineering service contractors. Ensure complete delivery.
• Develop a thorough understanding of the approved HSSE elements of service contractors’ QA/QC procedures and ensure strict compliance with same.

Requirements:

• Minimum of bachelor’s degree in a relevant discipline.
• Minimum of 5 years’ experience relevant to this scope.
• Must have track record of inspection of machine shops jobs, rental tool, service company equipment and drilling rig parts / activities.
•  Good working knowledge of relevant API and ISO Standards.

go to method of application »

Description:

• Carry out all geological work required for the timely execution of designated projects in an efficient and cost-effective manner, according to agreed technical specifications and standards. The scope and schedule of activities is to be agreed with the Head Subsurface, and updated in bi-weekly progress reviews.
• Develop scenario based geological models and realizations, incorporating relevant aspects of other disciplines to support field reviews, FDPs and ongoing drilling activities for the purpose of maximizing hydrocarbon recovery by identifying in-fill and development opportunities.
• Provide technical / operational advice while drilling, maintaining up to date well progress data, subsurface maps, and geological data.
• Develop well-integrated depositional environments to support 3D geological modelling.

Requirements:

• Degree in Geology or any related Field. Related professional qualification will be ideal.
• Minimum of 8 years’ experience in development geology, including exposure to well-site operations, petrophysics, seismic interpretation, formation evaluation, reservoir engineering and geological modelling.
• Extensive expertise in well-site operations, petrophysics, seismic interpretation, formation evaluation, reservoir engineering and geological modelling.

go to method of application »

Description:

• Ensure, on an ongoing basis, that current and planned technical architecture, investments and solutions are aligned with company business objectives.
• Prepare and monitor IT operational budgets that meet prevailing objectives and constraints.
• Develop and execute an analytics program that will allow company business leaders to make data-based decisions.
• Maintain oversight of all IT projects, ensuring that commitments are properly planned, staffed, monitored, and reported.
• Establish and enforce IT policies, processes, portfolio management, development standards and methodologies.

Requirements:

• Minimum of 8 years of career experience in technology, including a minimum of 5 years in a leadership position; valuable to have experience in CIO equivalent role.
• IT leadership experience in a global environment.
• Relevant experience in Oil & Gas or a related industry is preferred.
• An advanced degree Computer Science, Engineering and/or business.

go to method of application »

Description:

• Lead the undertaking of Drilling & Completions activities for well planning and well designs.
• Planning and execution of exploration, appraisal, and development drilling activity.
• Conduct detailed Well engineering studies and plan Well operations.
• Ensure Drilling & Completion Operations Procedures & Manuals are accurately developed and implemented.
• Actively participate in all well constructions, drilling and construction contracting process.
• Lead the technical and HSSE management of relevant service provider contracts. Collaborate with contractors regarding performance, future plans, variances, etc. as needed.

Requirements:

• Possess minimum 10 (fifteen) years active experience in drilling and completion with minimum 8 years in senior supervisory well Construction/Drilling and Completions position in a high project load environment with intense activity periods.
• Degreed engineer (master’s in petroleum engineering or Well Engineering desirable.
• Valid IWCF Well control certificate (Supervisor Level as a minimum).

go to method of application »

Description:

• Establish all relevant standards and procedures required to formalize the key processes to be used by the Asset Team management to manage asset integrity over the life cycle of the assets in compliance with Asset Integrity Policy and Procedures and sustain production.
• Plan and define a structured professional qualification programme for maintenance personnel and liaise with the relevant capability teams to develop training and certification programmes to improve staff competence and enhance productivity.
• Identify all Integrity Management responsibilities, ensure they are correctly allocated throughout the Asset Organization and properly documented as part of the Integrity Management System to maximize optimal facility uptime.
• Communicate effectively to operational and development teams with all relevant asset integrity information they can anticipate on major repairs or replacement plans and warn /advise management when integrity is about to be breached to minimize loss of production. 

Requirements:

• B. Eng./Sc degree in Mechanical/Electrical/Instrumentation Engineering.
• Minimum of 10 years of experience in oil and gas industry.
• Knowledge in the following areas and proficient in at least 3 activities: maintenance, inspection, process, production, design engineering, risk assessment, quality, and an awareness of in-house tools: FASTMAINT, EAM, etc.

go to method of application »

Description:

• Develop and deliver projects through the deployment and performance management of cross-functional technical and operational teams in the Development and Wells directorate.
• Ensure quality plans are in place through robust technical assurance in all stage gate reviews as well as the annual business planning cycle.
• Ensure that development plans receive appropriate and timely governance and serve as asset owner for non-producing and undeveloped resources.
• Deliver, in conjunction with the production and Engineering directorate, production optimization and enhancement programs.
• Ensure the application of current technology to field evaluations by construction of accurate & representative static and dynamic models of the subsurface.
• Prepare field studies including estimates of reserves, fluid contacts, reservoir distribution and structural configuration.

Requirements:

• University level education (Minimum Second-class upper B.Sc. in Engineering, Geology, Physics and Mathematics).
• A master’s degree in Petroleum Engineering will be an advantage. Relevant certifications will be an added advantage.

go to method of application »

Description:

• Gathering, analyzing, and interpreting subsurface 2D and 3D geophysical data for the purpose of assessing the amount of oil and gas contained within rock structures and quantifying in‐place volume (STOIIP).
• Responsible for carrying out detailed reservoir seismic characterization, interpretation, calculations, predictions, and modelling studies; and recommends and drives opportunities to improve geophysical data quality.
• Responsible for delivering a high technical standards seismic interpretation study with 3‐ dimensional subsurface pictures/maps/models on which high confidence inferences can be made for successful well drilling and quantify in‐place volume.
• Carry out calibration using available subsurface data through key seismic interpretation tasks: seismic‐to‐well tie, velocity model analysis, identifying faults, evaluates depth conversion methodologies and mapping for successful well drilling.

Requirements:

• University degree in Geology/Geophysics.
• Minimum of 8 years’ experience, depending on academic qualification.
• Postgraduate degree will be an added advantage.

go to method of application »

Description:

• Maintain QAQC on the tubular & other equipment through a quality inspection, handling, & transportation process.
• Maintain well cost within or under approved budget by following a standard material planning process.
• Ensure uninterrupted flow of materials and services to satisfy the demand for Casing, Tubing, Well Heads, Xmas Trees during the execution of technical work program.
• Ensure continuous improvement in procurement processes, institute process simplification “LLM / Logistics process control” and compliance through tracking key metrics and remediation of performance as required.
• Manage the LLM supply from third party by ensuring they are in line with the PO issued and ensure adequate tracking of tubulars in transit to the last point of delivery.

Requirements:

• Minimum of 10 years industry experience in oil and gas Company.
• High knowledge of rig equipment and their functionality.
• Good knowledge of OCTG maintenance, QAQC of drilling & completions equipment and inventory planning / management in line with the technical work program.
• Member of at least one professional body, including SPE.

go to method of application »

Description:

• An understanding of Specialist procurement activities, and the associated Engineering functionality related to procurement.
• Proven track record in overseeing EPC projects from womb to tomb. This includes pre- bidding process, pre-bid engineering, special procurement activities, construction, commissioning, and closeouts.
• A track record in team building, guidance, motivation, and management for EPC projects including Engineering, Procurement, Construction, Quality, Safety, Commissioning, Start up, and project closeouts.
• Proven track record in performing multidisciplinary projects from inception to close out, within project budgets.

Requirements:

• A suitable applicant should possess a minimum of 10 years post graduate experience, with at least 3 years in this same position.
• Bachelor of Engineering or higher in Mechanical Engineering/Electrical Engineering/or Project Management.
• Experience Overseas would be an added advantage.
• Post Graduate degree is a plus.

go to method of application »

Description:

• To ensure that all marine operations are conducted in a safe and environmentally aware manner, consistent with industry standards (MARPOL, SOLAS, ISGOTT, OCIMF etc.), by offload tankers at the terminal, supply vessels, tugs, work boats and other marine vessels operating within the offshore facilities.
• Assist in the review, monitoring and periodical audits of the performance, suitability, sustainability, regulatory performance, and quality standards of all marine vessels operating within the offshore facilities.
• Ensure all marine contingency, emergency response and crisis management plans are current and exercised regularly.
• Plan and schedule timely delivery of bunkers to the FPSO to ensure that sufficient stocks are always available.
• Ensure procedures for all export tanker operations and marine vessel operations are adhered to. Through continuous review and updating of procedures, legislations and technology etc. drive efficiencies and safety improvement in operations.

Requirements:

• Class 1 (Master Mariner) Certificate of Competency.
• DCE (Dangerous Cargo Endorsement) in Petroleum preferred.
• At least 5years experience as a Ship Captain, Marine Superintendent or Mooring/Loading Master, with relevant Oil & Gas terminal experience.
• Previous FPSO experience is important.

go to method of application »

Description:

• Prepare Pipeline design and deliverables for feasibility studies, conceptual/basic engineering, FEED and DED.
• Preparation of Piping & Pipeline diagrams (P & ID), Pipeline Alignment sheets/Profiles, data sheets and technical specifications.
• Preparation of Pipeline Wall thickness calculation.
• Excellent use of Engineering Software’s (i.e., AutoCAD, HYDROCOR, etc.)
• Conversant with National and International Codes, Standards and Engineering Practices used in the industry – API, ASME & ISA, ANSI, AGA, IEC, API, PIP, NAICE STANDARDS, DNV STANDARDS AND ASTM, ASME and API MSS, etc.

Requirements:

• Offshore experience is an added advantage.
• B.Eng. Mechanical Engineering. M.Sc. is an added advantage
• Minimum. 10 years in similar role.

go to method of application »

Description:

• Lead the designs of programs towards achieving production sustenance and restoration, production optimization.
• Participate in the design and implementation of intervention and production development activities.
• Monitoring the daily progress of well operations; safety and ensuring the good maintenance of the well.
• Develop detailed Well Intervention & production services scope of work for contracting purposes. Actively participate in all well services contracting process

Requirements:

• Possess minimum 10 (Ten) years active experience in well intervention, Intervention and Production with minimum 8 years in senior supervisory well Intervention operations position in a high project load environment with intense activity periods.
• M.Sc. Petroleum Engineering or Well Engineering.
• Valid IWCF Well control certificate.

go to method of application »

Description:

• Carry out duties as directed by the Company Offshore supervisory personnel in accordance with Company QHSE policy and operational procedures, including the implementation of Task and Dive Plans.
• Ensure Risk Assessments, JSA`s, TBTs have been conducted and recorded in accordance with Company procedures prior to any task being carried out also ensuring responsible person has instigated all identified control measures.
• Ensure all personnel have safety awareness of any tasks to be conducted, particularly in regard to COSHH, manual handling, Working at Height, Environment and Lifting Operations and correct planning and corrective actions are in place.

Requirements:

• Minimum of 10years; working experience in similar position.
• Must have relevant qualification in an engineering discipline to a minimum of HNC standard or time served technician with final City & Guilds certificate or equivalent.
• Must show/have IMCA competency criteria by having satisfactorily completed the MTCS assessment with a nominal minimum of 10years offshore experience and 200 hours piloting.
• Shall demonstrate technical and operational knowledge of ROV/Trenching systems.

go to method of application »

Description:

• Demonstrate understanding of Basic Engineering concepts arising from FEED/and or Feasibility studies as applicable for guiding the Detailed engineering during EPC process.
• Clear & proven understanding and involvement in project control procedures, including scheduling, cost control, monitoring, and execution.
• Proven track record in overseeing EPC projects from womb to tomb. This includes pre- bidding process, pre-bid engineering, special procurement activities, construction, commissioning, and closeouts.
• Proven track record in report writing skills, negotiations, and overall client relations management during EPC project execution.

Requirements:

• Minimum of 10years post graduate experience.
• Bachelor of Engineering or higher.
• Post Graduate degree is a plus.
• Must be a member of COREN and NSE

go to method of application »

Job Description:

• Receives and reviews requisitions ensuring all required information have been provided to enable successful procurement of works and services.
• Develops and gets approval of contracting strategy for each procurement.
• Takes the lead in preparing new contracts from the issue of inquiry documents to the approval of award including evaluation of bids and negotiations with bidders.
• Performs all contract administration duties including invoice verification; reporting on performance and schedule; variations and claims; and compliance with terms and conditions.

Requirements:

• Degree in engineering or related technical field, management sciences, economics or physical sciences.
• Preference is for candidates with relevant training and certifications in contract management, project management, cost engineering and commercial management.
• Minimum 5years of cognate contract & commercial management experience gained from oil & gas, engineering & construction and energy industries.

go to method of application »

Description:

• Planning, organizing and controlling camp operations.
• Ensuring compliance with the applicable work specifications of contracts. Controlling costs and utilization of manpower for optimum performance. Establishing work procedures and policies to achieve organizational objectives.
• Coordinating closely with client representatives and other contractor personnel to ensure customer satisfaction.
• Constantly monitoring operations with a view to more efficient management and performance techniques.
• Manage staff, preparing work schedules and assigning specific duties.
• Play a key role in budgeting and controlling costs. Specifically food and consumable costs, ensuring accurate POB schedules are prepared and submitted in a timely manner to the relevant departments.
• Organizes the implementation of instructions including customer service, catering delivery and handling, food safety, HACCAP, quality control and Health and Safety as per company approved SOP
• Any other duties as directed by P&F Manager

Qualifications

• City & Guilds 706-1/2 or Equivalent HACCP Level 3
• Minimum of 6-8 years of experience in similar position, preferable within oil and gas camp facilities.
• International experience, preferably West Africa regions Working with multi-cultural clients and colleagues

go to method of application »

Requirements:

• O.N.D in any Engineering Discipline or N.T.C or Trade Test Certificate1,2&3 or S.S.C.E
• B.Sc. in Engineering or related disciplines
• Min 15 Years’ experience in a major Construction organization with a well set up & managed Maintenance System covering Heavy Duty & Light Duty Construction Equipment, Light Duty Vehicles & Heavy-Duty Trucks.
• Relevant cognate experience in all kinds of Preventive, Corrective & Predictive maintenance activities on at least one or more of the following Equipment Types:
• CAT Excavators, CAT Bulldozers, CAT Motor Grader, CAT Wheel Loaders, CAT Pipe layers, CAT Swamp Buggies, VOLVO Pipe layers
• RT Cranes – Grove & Terex
• Crawler Cranes – American & Kobelco
• Mobil Compressors- Sullair, Ingersoll Rand & Atlas Copco
• Heavy Duty Trucks – Mack Trucks Flat Beds and Low Boys
• Light Duty Vehicles – Toyota Hilux & Hiace Bus ,PRADO/Land Cruiser
• Heavy Duty Generator Sets – Perkins, Deutz & Cummins
• Dump Truck
• Case or CAT Backhoe Loader
• Forklift   

go to method of application »

JOB DESCRIPTION

• Assist Lead instrumentation engineer and Head of section (Head of
• Instrumentation, Metering & Systems Support) for the updating of the
• Maintenance Plans including dedicated procedures, spare parts coverage, tools selection and other technical aspects, in accordance with the Maintenance Policy.
• Is together with Lead Metering Engineer focal point for Clientconcerning technical and commercial (fiscal) metering systems.
• Manage the maintenance and reliability of all metering systems and guarantee the integrity of their measurements.
• Follow-up within all matters concerning metering related contracts (sales, transportation, and/or other agreements) 

In connection with Client concerned entities he shall : 

• Prepare and manage maintenance plan, spare inventory and all other related administrative tools in UNISUP as regards Instrumentation, control systems and metering maintenance on site.
• Prepare and update the metering manuals describing the CLIENT technical & fiscal metering equipment as well as related operating procedures. Ensure the proper saving and storage of data back-up, and documentation.  
• Ensure that periodical meter proving exercise at our LACT points as well as the prover loop calibrations are carried-out as    provided for by the regulations governing operations of such facilities (DPR regulations).  
• Ensure that the fiscal gas metering system quarterly validations, Client Supply Point Technical and Commercial Ticketing Audit are  carried out in compliance with the Gas
• Utilisation Agreement with the Client and  the regulations governing operations of such facilities (DPR regulations).
• Ensure that the Fiscal Metering systems are fully operational, accurate and comply with the regulations defined by the Authorities. 
• Ensure proper certification of the fiscal metering systems and smooth relations with the DPR with the commercial team. 
• Liase with the Main Maintenance Contractor teams on the necessary corrective actions as relates to the metering systems. 
• Specify the new technical and commercial metering systems in co-operation with instrumentation specialists. 
• Initiate and follow-up the monitoring of performance for the equipment defined within the Field of Competence including Metering Systems, Fire and Gas detection systems, ESD systems, Security control, etc. 
• Work closely with instrumentation Maintenance Methods during metering interventions and share experience(s) accordingly.
• Provide and clarify flow equation formulae to be entered/ entered on the ICSS. 
• Coordinate with the Technical Support and Smart Room teams for the investigations, follow-up and reporting of deficiencies or significant events.
• Issue FITA (Failure Investigations and Technical Analysis) reports and REX+ Return of experience related to equipment within the Field of Competence. 

QUALIFICATION

• B.Sc / B.Eng. Degree in any engineering related discipline such as Instrument/Control/Electronic/Automation/Petroleum/Chemical.
• 5 to 10 years working experience in an oil producing, manufacturing or service Company with specialized training/competence im Metering techniques.
• Large Expertise in Metering systems and International Metering Codes (ISO, API, AGA,etc ...) Good relational, presentation and communication skills.
• Computer literate, with a knowledge of computerised process systems.
• Ability to organize a mission campaign in an offshore environment

go to method of application »

Description:

• Excellent understanding of the EPC industry
• Good communication skills
• Minimum 10 years industry experience
• High knowledge of Technical Drawings  and their functionality
• Good knowledge of oil and gas/EPC regulations and standards