Latest Jobs at International Energy Services Limited (IESL)

Key Accountabilities

• Promote Safety culture and drive Goal Zero compliance at the worksite.
• Enforcing Shell and IOGP HSE policies and procedures at worksites.
• Review documents issued by the contractor for the Scope of Work relevant to the Subsea manifold & Connection Systems.
• Participate in Design Reviews and Technical Workshops and any other Meetings as may be assigned in the Scope of Work.
• Review disposition Deviation/Derogation Requests, and Technical Queries that may originate from the contractor.
• Supervise manufacturing/fabrication of rigid subsea well jumpers and associated structures, ensuring compliance with procedures, design documentation, approved Inspection and test plan (ITP) and validation through testing,
• Oversee long lead items and other materials/goods receipt, inspection, and verification checks.
• Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites
• Ensure Materials Record Book (including Certificated of Conformance and other technical documentation are available prior to loadout of equipment.
• Liaise with EPC-3’s logistics team at the Local Fabrication Site, to support timely transportation of equipment to the quayside and safely load out of same.
• Ensure proper storage of subsea Equipment, tools, accessories per Contractor’s storage and maintenance procedure.
• Review and provide input to Assembly and Testing Procedure, Transportation Handling Instruction, Installation and offshore Testing Procedure.
• Liaise with Company’s Lifting and Hoisting SME to review lift plan, rigging register and support safe lifting operation.
• Supervise activities at the EPC-3 Local Fabrication Site and confirm compliance with the approved procedure. Activities
• shall not be limited to Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance Test, System Integration Test.
• Work with EPC-3 Contractor to ensure quality issues are properly identified, documented and timely dispositioned.
• Provide on a regular basis, a status and progress report of activities to the Lead Engineer.
• Log and track lessons Learned during the detailed design and manufacturing activities within the Package.
• Collaborate with EPC-3’s Workshop, Planning, QC, Warehouse, and other support team during execution of the manifold and Jumper scope, to drive compliance with project requirement and agreed schedule and key dates.
• Responsible for safe and efficient execution of work scope, and drive its timely completion, per contract and procedures.
• Liaise with internal stakeholders i.e., project, asset & operations, Wells, marine logistic, geomatic, aviation, diving, etc. team to ensure adequate support for project execution.
• Contribute to Close-out Report relevant to the Subsea manifold and Connection Systems.
• International Energy Services Limited
• Oversee engineering analysis, creation of drawings, fabrication, and testing procedures (Welding, NDE, Coating) and other design outputs for construction.
• Participate in Design reviews HAZOPS, HAZIDS
• Review and maintain installation, operation, and maintenance manuals and guidelines.
• Review, check and approve drawings for construction at worksites.
• Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites
• Lead Root-Cause-Failure Analysis (RCFA), report-out and implement preventive and proactive actions close-out.
• Share knowledge across the company. Identify and champion best practices.
• Monitor manufacturing activities at various worksites and ensure appropriate witness, review, and approvals by
• Company representatives per approved project inspection and test plans.
• Support the development of young personnels.
• The service will involve work and travel to fabrication sites, OEM facility and offshore vessels in the Gulf of Guinea.

The Candidate must possess / display:

• At least 15 years of combined experience in engineering, manufacturing/fabrication and installation of subsea manifold and tie-in systems (Subsea rigid Jumpers and Connection Systems).
• Minimum of bachelor’s degree in mechanical engineering, Marine Engineering and/or Master in Subsea Engineeringrelated discipline.
• Practical experience in Connection Systems (Hubs and Connectors) engineering and manufacturing processes of the
• Subsea Hardware systems.
• Practical experience in mechanical, electrical, or hydraulic design of subsea products
• Practical experience as Company / Operator Representation in similar type project execution.
• Practical experience in integration and testing of pressure containing components such as pipe, forged fittings, valves, and hubs.
• Practical experience in use of CAD for models, drawings, and schematics.
• Good understanding and practical application of the following industry standards and codes related to subsea hardware and systems such as: API-RP-17R, API6A & 17D, ASME Section IX, ASME B31.3, ASME B31.8, API-RP-17H, API
• RP-17P, API RP-17R, API-RP-2A-WSD, AWS-D1.1, DNV-RP-F119, as well as other ISO, DNV and NORSOK equivalent standards in major subsea project is required
• Knowledge in use of MS Office tools or similar software.
• Practical experience in working with OEM technicians and engineers to resolve technical issues.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.

SUMMARY OF ELIGIBILITY REQUIREMENTS

MinimumEducationRequired

• Minimum of bachelor’s degree in mechanical engineering, Marine Engineering and/or Master in Subsea Engineering related discipline.

MinimumExperienceRequired

• At least 15 years of combined experience in engineering, manufacturing/fabrication and installation of subsea manifold and tie-in systems (Subsea rigid Jumpers and Connection Systems).
• International Energy Services Limited
• SupportiveCoreSkillsRequired: Practical experience in Connection Systems (Hubs and Connectors) engineering and manufacturing processes of the Subsea Hardware systems.
• Practical experience in mechanical, electrical, or hydraulic design of subsea products
• Practical experience as Company / Operator Representation in similar type project execution.
• Practical experience in integration and testing of pressure containing components such as pipe, forged fittings, valves, and hubs.
• Practical experience in use of CAD for models, drawings, and schematics.
• Good understanding and practical application of the following industry standards and codes related to subsea hardware and systems such as: APIRP-17R, API6A & 17D, ASME Section IX, ASME B31.3, ASME B31.8, APIRP-17H, API RP-17P, API RP-17R, API-RP-2A-WSD, AWS-D1.1, DNV-RPF119, as well as other ISO, DNV and NORSOK equivalent standards in major subsea project is required
• Knowledge in use of MS Office tools or similar software.
• Practical experience in working with OEM technicians and engineers to resolve technical issues.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.

go to method of application »

Key Accountabilities

• Ensure HSSEQ Compliance: Ensure all welding activities comply with HSSEQ (Health, Safety, Security, Environment and Quality) standards and promote a safety-first culture on-site.
• Enforcing Shell and IOGP (International Oil and Gas Producers) HSE (Health Safety and Environment) policies and procedures at Company worksites.
• Review Welding Procedures: Review detailed welding procedures, specifications, and instructions developed by the EPC contractor to ensure compliance with project requirements and industry standards.
• Ensure Technical Assurance: Provide technical assurance for all welding-related deliverables during the Detailed
• Engineering Design phase, ensuring they meet project specifications and quality standards. Respond to technical clarification and queries from contractor.
• Manage Welding Qualifications: Oversee and verify welding qualification tests, including Procedure Qualification
• Records (PQR), Welder Qualification Tests (WQT), and Welding Procedure Specifications (WPS), ensuring compliance with project requirements and industry standards.
• Conduct Welding Inspections: Perform and oversee welding inspections and non-destructive testing (NDT) to ensure weld quality and integrity.
• Review and Approve Welding Plans: Review and approve welding plans and procedures submitted by the EPC contractor, ensuring they are robust and meet project standards.
• Resolve Welding Issues: Address and resolve welding-related technical queries and issues during design, procurement, fabrication, and installation phases.
• Interface Management: Manage interfaces between welding activities and other project disciplines, including Subsea
• Hardware, FPSO, and Umbilical systems.
• Conduct Technical Reviews: Participate in technical reviews, including HAZIDs, HAZOPs, and constructability reviews, providing expert input on welding-related matters.
• Maintain Industry Knowledge: Stay updated with the latest welding technologies, industry standards, and best practices to ensure the project utilizes the most efficient and effective welding methods.
• Provide Training and Support: Provide training and technical support to project personnel and contractors on weldingrelated issues.
• Oversee Contractor Performance: Monitor and evaluate the performance of contractors' welding activities to ensure compliance with project requirements and industry standards.
• Document Control: Ensure all welding documentation, including reports, certificates, and records, are accurately maintained and readily available for review and audit.
• Champion Quality Assurance: Promote and enforce quality assurance practices throughout all phases of the welding operations to achieve high standards of workmanship and reliability.
• Support Installation Activities: Provide technical support during the installation and commissioning phases, ensuring welding activities are completed on schedule and to the required quality standards.
• Responsible for safe, timely and efficient execution and drive progress of work scope based on project schedule.
• Work with Contractor to ensure quality issues are properly identified, documented, reported and timely dispositioned.
• Author and deliver daily, weekly, and monthly status, progress, and site reports.
• Liaise with internal stakeholders i.e., Quality, HSE, project control, engineering disciplines, planning, etc. to ensure adequate support for project execution.
• Log and track lessons Learned during the detailed design and manufacturing activities within the Package.

The Candidate must possess / display:

• Minimum of 15 years work experience with at least 10 years relevant experience in welding engineering, with a focus on pipeline and structural welding in an upstream Deepwater or similar environment.
• Minimum of bachelor’s degree in Welding Engineering, Mechanical Engineering, Metallurgy, or a related discipline, with professional registration.
• Extensive experience in developing, reviewing, and approving welding procedures, specifications, and instructions.
• Proven experience with welding qualification tests, including Procedure Qualification Records (PQR), Welder Qualification Tests (WQT), and Welding Procedure Specifications (WPS).
• Proficiency in conducting and overseeing welding inspections and non-destructive testing (NDT) techniques.
• Good understanding and application of Industry standards and codes for welding (DNV, API, ASME, etc.).
• Knowledge in use of MS Office tools or similar software
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.

SUMMARY OF ELIGIBILITY REQUIREMENTS

MinimumEducationRequired

• Minimum of bachelor’s degree in Welding Engineering, Mechanical Engineering, Metallurgy, or a related discipline, with professional registration.

MinimumExperienceRequired

• Minimum of 15 years work experience with at least 10 years relevant experience in welding engineering, with a focus on pipeline and structural welding in an upstream Deepwater or similar environment.
• SupportiveCoreSkillsRequired: Extensive experience in developing, reviewing, and approving welding procedures, specifications, and instructions.
• Proven experience with welding qualification tests, including Procedure Qualification Records (PQR), Welder Qualification Tests (WQT), and
• Welding Procedure Specifications (WPS).
• Proficiency in conducting and overseeing welding inspections and nondestructive testing (NDT) techniques.
• Good understanding and application of Industry standards and codes for welding (DNV, API, ASME, etc.).
• Knowledge in use of MS Office tools or similar software
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.

go to method of application »

KeyAccountabilities

• Promoting Goal Zero Safety and Quality culture and drive compliance at the worksite.
• Enforcing Shell and IOGP (International Oil and Gas Producers) HSE (Health Safety and Environment) policies and procedures at Company worksites.
• Review and provide input to technical specification documents, P&IDs and other detailed engineering documents for subsea distribution system and other interfacing systems.
• Respond to Subsea Control and Distribution related queries and technical clarification questions from contractor.
• Responsible for ensuring the manufacturing/fabrication of Umbilical Termination assembly (UTA), Hydraulic
• Distribution Manifold (HDM), Electrical Distribution Manifold (EDM), Umbilical Termination Heads (UTH), Umbilical
• Termination Assembly Jumpers (UTAJ), Electrical and Hydraulic Flying Leads and associated transportation, storage, and installation aids comply with project specifications, procedures, design documentations and approved Inspection and test plan (ITP) and validation through testing. Ensure appropriate witness, review, and approvals by Company representatives per approved project inspection and test plans.
• Responsible for safe, timely and efficient execution and drive progress of work scope based on project schedule.
• Witness fabrication, assembly and / manufacturing activities at Fabrication Site and confirm compliance with the approved procedure.
• Witness site activities including Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance
• Test and System Integration Test and confirm compliance with the approved procedure.
• Work with Contractor to ensure quality issues are properly identified, documented, reported and timely dispositioned.
• Author and deliver daily, weekly, and monthly status, progress, and site reports.
• Oversee materials/goods receipt, inspection, and verification checks and reporting.
• Coordinate readiness and execution of integration tests across packages / disciplines.
• Review and provide input to Assembly and Testing Procedure, storage and preservation, Transportation Handling
• Instruction, Installation, and offshore Testing Procedure.
• Ensure Materials Record Book (including Certificate of Conformance and other technical documentation are available prior to loadout of equipment.
• Coordinate logistics at the Local Fabrication Site for timely packaging and transportation of equipment to the quayside and safely load-out to installation / Transportation vessel.
• Liaise with Company’s Lifting and Hoisting SME (Subject Matter Expert) to review lift plan, rigging register and support safe lifting operations.
• Supervise offshore installation, testing, pre-commissioning, and commissioning of the subsea control and distribution hardware.
• Liaising with Project Engineers responsible for delivery of other packages within the project e.g., Umbilical systems,
• Flow control systems, well control systems, flowlines etc. to successfully manage interfaces and drive compliance with project requirements.
• Coordinate meetings and design reviews with contractor engineers and technicians and report outcomes.
• Liaise with internal stakeholders i.e., Quality, HSE, project control, engineering disciplines, planning, asset & operations, Wells, marine, logistic, aviation, subsea intervention etc. to ensure adequate support for project execution.
• Log and track lessons Learned during the detailed design and manufacturing activities within the Package.
• Review operation, and maintenance manuals and guidelines issued by contractor.
• The service will involve work and travel to fabrication sites, OEM facility and offshore vessels in the Gulf of Guinea.

The Candidate must possess / display:

• Minimum of 15 years work experience with at least 10 years relevant experience in design, fabrication, and installation of deepwater subsea hardware systems. Specific experience in design, fabrication and installation of Subsea distribution hardware will be an advantage.
• Minimum of bachelor’s degree in electrical, mechanical, civil, and subsea engineering, with professional registration.
• Good understanding and application of Industry standards and codes (API17F / ISO 13628-6, API 17H, API 17TR4, API 17TR5, API 17TR6, IEC 60287, ASME B31.3, ASME IX, ASME B31.8, ISO 15607).
• Practical experience in working with subsea hardware / distribution systems OEMs (Original Equipment Manufacturer).
• Practical experience in developing subsea hardware specification and Datasheet.
• Knowledge in use of MS Office tools or similar software
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.
• Demonstrable project management experience and possibly with certifications if applicable.

SUMMARY OF ELIGIBILITY REQUIREMENTS

MinimumEducationRequired

• Minimum of bachelor’s degree in electrical, mechanical, subsea engineering with professional registration.

MinimumExperienceRequired

• Minimum of 15 years work experience with at least 10 years relevant experience in design, fabrication, and installation of deepwater subsea hardware systems. Specific experience in design, fabrication and installation of Subsea distribution hardware will be an advantage.
• SupportiveCoreSkillsRequired:
• Good understanding and practical application of Industry standards and codes (API17F / ISO 13628-6, API 17H, API RP 17N, ASME B31.3, ASME IX, IEC 60287).
• Practical experience in working with subsea control systems OEMs.
• Practical experience in developing subsea control specification and datasheet.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.
• Demonstrable project management experience and possibly with certifications if applicable.
• Knowledge in use of MS Office tools or similar software