Job Openings at Technip

Job Purpose

• Executes the HSE Plan and any other Project requirements, taking into account Group HSE standards, and provides expert advice and support at project and site level.

Job Description

• Ensure the development of HSE Information Packs for main subcontractors, and associated safety campaign material.
• Train, monitor and coach shop/site, office and field team members to improve skill level, to ensure adherence to principles, procedures, policies and standards to improve safety, health and environmental processes in a reliable and cost effective manner.
• Proactively manages safety, health and environmental issues and ensures compliance with Federal, State, Local and Corporate requirements / standards relating to recordkeeping, permits, reports, training and other related concerns. Ensures that issues are identified and addressed in a timely manner.
• Takes responsibility and accountability for Safety; will not take or accept short cuts; responsibility will be taken to intervene or stop the job if required.
• Lead incident investigations and facilitates communications, problem resolution, and appropriate feedback, both positive and corrective within the teams. Develop reports and communication of incidents and recommended preventative measures to be distributed within TechnipFMC.
• Gather all information that could affect TechnipFMC and analyze information to make forecasts and recommendations. Create and plan ways to reduce occasions of risks by assisting various project teams with HSE related issues such as Job Safety Analysis (JSA), Risk Assessment, HAZIDS, etc.
• Ensure all work related medical, first aid and case management are well managed. Leads Emergency Response Team (ERT) as required. Monitor issues related to medical service providers such as clinics, hospitals and company doctors (for work related issues) and relate to the Manager & HR.
• Maintains the Project Training Plan and associated records.
• Ensures the maintenance of the project Risk Management Dossiers
• Collects, analyzes, and reports HSE performance statistics for the site
• Maintains the Project Risk Register and reports status of actions
• Establishes and maintains record of project audit findings; reports close out status of findings
• Ensure the development, review, and update of HSE deliverables
• Identifies trends regarding the recurrence of accidents/incidents/near misses and provides feedback to Projects as necessary
• Implements of the HSE plan or Safety plan which will be declined into adhoc procedures and tasks list

Requirements

You are meant for this job if:

• Diploma or Degree in a related field.
• 8-10 years’ relevant work experience in this field preferred
• Possess good PC skills and knowledge of word processing, spreadsheet and presentation software. Possess effective leadership ability within a team environment.
• Demonstrate exceptional negotiation, motivating, planning, presentation, interpersonal and communication skills.
• Maintain the ability to handle multiple tasks and changing priorities in a fast-paced environment.

go to method of application »

Job Purpose

• Ensure the quantitative and qualitative adequacy of resources with Fabrication & Welding projects and operation’s needs.
• Ensures the implementation of TechnipFMC Fabrication & Welding standards procedures & processes, and the respect of quality standards, targets and customers satisfaction.

Job Description

• Monitors, executes and control key support functions and manufacturing resources to meet scheduled shipments in a quality and cost effective manner.  
• Monitors and schedules the flow of materials, components, assemblies or inventory within the plant.
• Coordinates rental tool deployment, allocation, mobilization and storage activities through planning, execution and completion.
• Preliminary planning of project work to consist of developing and communicating schedules, allocating assets and attending pre-job meeting with the project teams to understand requirements.
• Project execution, inclusive of monitoring and tracking baseline schedules comparatively to actual.  
• Ensuring project schedules are maintained and met. Verification of equipment availability and readiness by working with other groups.
• Tracking and reporting project expenditures associated with labor, materials, vendors and other misc. costs.
• Identifies tracks and documents variances to the original work scope and reports them to the Technical Manager.
• Perform frequent inventory assessments and formally reports finds back to the Technical Manager.
• Accurately captures asset departure and return dates.
• Assist in the generation of local work instructions and process improvements related to asset locations and availability.
• Eradicate schedule issues by working with the Technical Manager and project teams.

Requirements

You are meant for this job if:

• You are a Nigerian
• University Engineering Degree (preferred mechanical or welding)
• Possibly professional registration by Engineers institution, depending on local regulation
• Minimum of 15 years of experience in Fabrication / Welding
• Strong knowledge of fabrication procedures and methods
• Strong knowledge of Subsea activities
• Strong analysis/Problem Solving
• Multi-discipline exposures within projects.
• Excellent interpersonal skills
• Fluency in professional English
• Must have a general knowledge of typical manufacturing and inspection processes.  
• Should also be familiar with offshore operations, inclusive of Installation, work-over and retrieval.

go to method of application »

Job Purpose

• Responsible for the successful execution of the assigned project package by coordinating all the disciplines involved such as engineering, procurement, inspection, testing, transport, etc., in accordance with TechnipFMC QHSES corporate policies, contractual commitments (design data, codes, classes etc.), schedule and budget.

Job Description

• A subject matter expert within the functional teams providing insight and possibly supervision to work teams comprised of various skill levels.  Works with clients to understand their needs.  May perform computer modeling and analysis to support engineering projects.
•  Uses commercially available FEA and/or CFD software. May pre-process and post-process on local workstations and launch multi-processor runs on high performance computing cluster.
• Participates in engineering solutions as part of a project taskforce, in accordance with company standards, procedures, processes, schedules, and budget, with a continuous concern for quality, targets, and customer satisfaction.  Technical support may be required during Tender Preparation, EPC Project Execution, Services Onshore/ Offshore Activity Execution. Knowledgeable in use of relevant Engineering tools. Leads and supports project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon the assigned group.
• Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope.
• Develops product design, geometry standards documentation and product qualification requirements.. Creates, reviews/approves part reports, drawings, engineering specifications and standards.
• Defines product quality, material, welding, and NDE requirements.
• Supports and manage project schedule and deliverables. Generate and lead conceptual designs or customize existing designs for proposals or projects from customer or internally generated specifications and prepare design layouts. Verify designs where necessary using classical analysis techniques (bending, buckling, shear, bearing, and pressure vessel).
• Present designs to engineering staff during internal design review; prepare and/or review BOMs, documents and drawings.  Selecting raw materials, coatings, and quality requirements as necessary. Support product lifecycle from tendering,  system and product design through to  aftermarket support

You are meant for this job if:

• Be a Nigerian citizen.
• Bachelor’s Degree in Engineering with at least 8 years’ mechanical, electronic and/or hydraulic related experience in an oilfield equipment environment (particularly subsea production hardware) and successful completion of the  Subsea Service Technician Apprentice Program or Engineering Boot Camp. 
• Minimum 5 year’s experience in Subsea engineering. Capable of doing system engineering tasks. 
• Capable of producing standard technical system documents.Capable of solving technical issues with coaching.
• Knowledgeable in how changes influences system engineering cost. Capable of leading teamwork. 
• Capable of leading internal meetings.

go to method of application »

Job Purpose

• Responsible for the successful execution of the assigned project package by coordinating all the disciplines involved such as engineering, procurement, inspection, testing, transport, etc., in accordance with TechnipFMC QHSES corporate policies, contractual commitments (design data, codes, classes etc.), schedule and budget.

Job Description

• A subject matter expert within the functional teams providing insight and possibly supervision to work teams comprised of various skill levels.  
• Works with clients to understand their needs.  
• May perform computer modeling and analysis to support engineering projects.
• Uses commercially available FEA and/or CFD software.
• May pre-process and post-process on local workstations and launch multi-processor runs on high performance computing cluster.
• Participates in engineering solutions as part of a project taskforce, in accordance with company standards, procedures, processes, schedules, and budget, with a continuous concern for quality, targets, and customer satisfaction.
• Technical support may be required during Tender Preparation, EPC Project Execution, Services Onshore/ Offshore Activity Execution
• Knowledgeable in use of relevant Engineering tools.
• Leads and supports project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon the assigned group.
• Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope.
• Develops product design, geometry standards documentation and product qualification requirements.
• Creates, reviews/approves part reports, drawings, engineering specifications and standards.
• Defines product quality, material, welding, and NDE requirements.
• Supports and manage project schedule and deliverables.
• Generate and lead conceptual designs or customize existing designs for proposals or projects from customer or internally generated specifications and prepare design layouts.
• Verify designs where necessary using classical analysis techniques (bending, buckling, shear, bearing, and pressure vessel).
• Present designs to engineering staff during internal design review; prepare and/or review BOMs, documents and drawings.
• Selecting raw materials, coatings, and quality requirements as necessary.
• Support product lifecycle from tendering,  system and product design through to  aftermarket support

Requirements
You are meant for this job if:

• Be a Nigerian citizen.
• Bachelor's Degree in Engineering with at least 8 years’ mechanical, electronic and/or hydraulic related experience in an oilfield equipment environment (particularly subsea production hardware) and successful completion of the  Subsea Service Technician Apprentice Program or Engineering Boot Camp. 
• Minimum 5 year’s experience in Subsea engineering. Capable of doing system engineering tasks. 
• Capable of producing standard technical system documents.Capable of solving technical issues with coaching. Knowledgeable in how changes influences system engineering cost. Capable of leading teamwork. 
• Capable of leading internal meetings.

go to method of application »

Job Purpose

• Responsible for the successful execution of the assigned project package by coordinating all the disciplines involved such as engineering, procurement, inspection, testing, transport, etc., in accordance with TechnipFMC QHSES corporate policies, contractual commitments (design data, codes, classes etc.), schedule and budget.

Job Description

• A subject matter expert within the functional teams providing insight and possibly supervision to work teams comprised of various skill levels.
• Works with clients to understand their needs.
• May perform computer modeling and analysis to support engineering projects.
• Uses commercially available FEA and/or CFD software.
• May pre-process and post-process on local workstations and launch multi-processor runs on high performance computing cluster.
• Participates in engineering solutions as part of a project taskforce, in accordance with company standards, procedures, processes, schedules, and budget, with a continuous concern for quality, targets, and customer satisfaction.
• Technical support may be required during Tender Preparation, EPC Project Execution, Services Onshore/ Offshore Activity Execution.
• Knowledgeable in use of relevant Engineering tools.
• Leads and supports project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon the assigned group.
• Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope.
• Develops product design, geometry standards documentation and product qualification requirements.
• Creates, reviews/approves part reports, drawings, engineering specifications and standards.
• Defines product quality, material, welding, and NDE requirements.
• Supports and manage project schedule and deliverables.
• Generate and lead conceptual designs or customise existing designs for proposals or projects from customer or internally generated specifications and prepare design layouts.
• Verify designs where necessary using classical analysis techniques (bending, buckling, shear, bearing, and pressure vessel).
• Present designs to engineering staff during internal design review; prepare and/or review BOMs, documents and drawings.
• Selecting raw materials, coatings, and quality requirements as necessary.
• Support product lifecycle from sales, tendering, system and product design through to service and aftermarket support

Requirements
You are meant for this job if:

• Be a Nigerian citizen.
• Have a minimum of Bachelor’s Degree in Engineering with at least 10 years’ mechanical, electronic and/or hydraulic related experience in an oilfield equipment environment (particularly subsea production hardware) and successful completion of the Subsea Service Technician Apprentice Program or Engineering Boot Camp.
• Minimum 5 year’s experience in Subsea engineering.
• Capable of doing system engineering tasks.
• Capable of producing standard technical system documents.
• Capable of solving technical issues with coaching.
• Knowledgeable in how changes influences system engineering cost.
• Capable of leading teamwork.
• Capable of leading internal meetings.
• Demonstrated ability to create installable, functional, and cost effective designs that meet specification/requirement from external clients.
• Ability to design complex engineering plans and review/approve design work for systems and products.
• Understanding of typical offshore construction design codes is required. (API 17D, ASME B31.8, API RP 2A, AISC)

go to method of application »

Job Purpose

• Within the framework of company's values, policies, and contract commitments (including HSES, quality, time & cost), the Project Manager is accountable for project timely delivery and Profit & Loss by managing all project activities and resources while ensuring client satisfaction.

Job Description

• Plans, manages and coordinates assigned projects typically consisting of large Engineering, Procurement, Construction and Installation contracts.  Typically manages projects involving multi-sites and/or remote installation locations. Manages the detail technical schedule and financial performance of the project in order to deliver a quality product, on time and at the lowest achievable cost.Serves as the primary point of contact for the customer after the sale as assigned.  Builds and maintains relationship with customer and other suppliers associated with the Project. Preliminary planning of project work to consist of developing and communicating schedules, allocating assets and attending pre-job meeting with the project teams to understand requirements.
• Participates in the quotation process and provides project management related information such as schedules and budgets. Project execution, inclusive of monitoring and tracking baseline schedules comparatively to actual.  Ensuring project schedules are maintained and met. Verification of equipment availability and readiness by working with other groups.
• Tracking and reporting project expenditures associated with labor, materials, vendors and other misc. costs. Identifies tracks and documents variances to the original work scope and reports them to the Technical Manager.
• Perform frequent inventory assessments and formally reports finds back to the Technical Manager. Accurately captures asset departure and return dates.
• Assist in the generation of local work instructions and process improvements related to asset locations and availability.
• Eradicate schedule issues by working with the Technical Manager and project teams.

You are meant for this job if:

• You are a Nigerian
• Engineering degree or equivalent diploma
• 8 years of experience as project engineer
• Professional English
• Excellent understanding of on-offshore/subsea projects, including relevant equipment, operations and services
• Ability to lead functional project teams and manages critical timelines with the goal to streamline and provide critical customer service

go to method of application »

Job Purpose

• Executes the HSE Plan and any other Project requirements, taking into account Group HSE standards, and provides expert advice and support at project and site level.

Job Description

• Train, monitor and coach shop/site, office and field team members to improve skill level, to ensure adherence to principles, procedures, policies and standards to improve safety, health and environmental processes in a reliable and cost effective manner.
• Proactively manages safety, health and environmental issues and ensures compliance with Federal, State, Local and Corporate requirements / standards relating to recordkeeping, permits, reports, training and other related concerns.
• Ensures that issues are identified and addressed in a timely manner.
• Takes responsibility and accountability for Safety; will not take or accept short cuts; responsibility will be taken to intervene or stop the job if required.
• Lead incident investigations and facilitates communications, problem resolution, and appropriate feedback, both positive and corrective within the teams. Develop reports and communication of incidents and recommended preventative measures to be distributed within TechnipFMC.
• Gather all information that could affect TechnipFMC and analyze information to make forecasts and recommendations. Create and plan ways to reduce occasions of risks by assisting various project teams with HSE related issues such as Job Safety Analysis (JSA), Risk Assessment, HAZIDS, etc.
• Ensure all work related medical, first aid and case management are well managed. Leads Emergency Response Team (ERT) as required. Monitor issues related to medical service providers such as clinics, hospitals and company doctors (for work related issues) and relate to the Manager & HR.
• Collects, analyzes, and reports HSE performance statistics for the site
• Ensure the development, review, and update of HSE deliverables
• Identifies trends regarding the recurrence of accidents/incidents/near misses and provides feedback to Projects as necessary.

Requirements
You are meant for this job if:

• Diploma or Degree in a related field.
• 8-10 years’ relevant work experience in this field preferred
• Possess good PC skills and knowledge of word processing, spreadsheet and presentation software. Possess effective leadership ability within a team environment.
• Demonstrate exceptional negotiation, motivating, planning, presentation, interpersonal and communication skills.
• Maintain the ability to handle multiple tasks and changing priorities in a fast-paced environment.

go to method of application »

Job Purpose

• Supports the development, improvements and deployment of Quality Management systems and tools. Implements employees' trainings.

Job Description

• Responsible for ensuring product quality for the product line.
• Identifying problems and providing solutions.
• Interfaces and coordinates with Product Engineering, Project/Product Management, and Customer for resolution of quality issues.
• Quality Team Member whose responsibilities include recommendations for supplier audits, training, status changes, additions, removals, corrective actions, review of supplier performance evaluations.
• Interface and coordinate with Engineering and Welding Engineering for Supplier Material and Welding Qualifications requirements.
• Perform root cause analysis and correction for repetitive supplier problems.
• Involve in handling Corrective Action Requests (CAR’s) and Non-Conformance Reports (NCR’s). Investigates problems with processes or system procedures, evaluates root cause, recommends corrective action and follows-up to ensure that action was effective.
• Performs and may lead internal and external audits of Quality Systems.
• Interface with functions on Quality related issues and training.
• Develops statistical sampling plans to inspect supplier parts at the receiving inspection.
• Receives direction from manager to set broad objectives.

You are meant for this job if:

• Bachelor Degree preferred.
• 8-10 years’ experience in Quality Assurance field with experience in supplier or procurement quality or engineering field.
• Black Belt, and/or six sigma certification preferred.
• ASQ Certification in Quality Engineering is preferred.
• Strong statistical data analysis and sampling plans skills.
• Material Review Board (MRB) experience.
• Root Cause and Corrective Action and FMEA experience is preferred.
• Knowledge of inspection tools, measurement and calibration system.
• Knowledge of ISO 9001 (International Standard Organization) / API Q1 (American Petroleum Institute equivalent)
• Interpretation of Customer requirement.

go to method of application »

Job Purpose

• Ensures all Quality Control activities are performed in order to ensure that products are manufactured and delivered in compliance with Standards and with Client requirements

Job Description

• Responsible for ensuring product quality for the product line.
• Identifying problems and providing solutions.
• Receives direction from manager to set broad objectives.
• Consistently and clearly demonstrates creativity and innovation in finding solutions to multi‐faceted or time sensitive problems.
• Over 80% of product is outsourced, so position is critical to establishing and maintaining successful of source surveillance programs with global reach as well as supplier improvement.

You are meant for this job if:

• Bachelor Degree preferred.
• 10 years’ experience in Quality Assurance field with experienced in supplier or procurement quality or engineering field.
• Master Black Belt, Black Belt, and/or six sigma certification preferred.
• ASQ Certification in Quality Engineering is preferred.
• Strong statistical data analysis and sampling plans skills.
• Material Review Board (MRB) experience.
• Root Cause and Corrective Action and FMEA experience is preferred.
• Knowledge of inspection tools, measurement and calibration system.
• Knowledge of ISO9001 (International Standard Organization) / API Q1 (American Petroleum Institute equivalent)
• Interpretation of Customer requirement.